Fabrication of Ni–Co–BN (h) Nanocomposite Coatings with Jet Electrodeposition in Different Pulse Parameters
Open Access
Abstract
In order to study the effects of pulse parameters on jet electrodeposition, Ni–Co–BN (h) nanocomposite coatings were prepared on the surface of steel C1045. The samples were analyzed and characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), laser scanning confocal microscopy (LSCM), microhardness tester, and electrochemical workstation. The experimental results showed that the contents of Co and BN (h) nanoparticles in the coatings changed with the variation of pulse parameters. When the pulse frequency was 4 kHz and the duty cycle was 0.7, their contents reached maxima of 27.34 wt % and 3.82 wt %, respectively. The XRD patterns of the coatings showed that the deposits had a face-centered cube (fcc) structure, and there was an obvious preferred orientation in (111) plane. With the increase in pulse parameters, the surface roughness of the coatings first decreased and then increased, with the minimum value obtained being 0.664 µm. The microhardness of the coatings first increased and then decreased with increase in pulse parameters. The maximum value of the microhardness reached 719.2 HV0.05 when the pulse frequency was 4 kHz and the duty cycle was 0.7. In the electrochemical test, the potentiodynamic polarization curves of the coatings after immersion in 3.5 wt % NaCl solution showed the pulse parameters had an obvious effect on the corrosion resistance of the Ni–Co–BN (h) nanocamposite coatings. The corrosion current density and polarization resistance indicated that the coatings had better corrosion resistance when the pulse frequency was 4 kHz and duty cycle was 0.7.Keywords
Funding Information
- University Natural Science Research Project of Anhui Province (KJ2017A438)
- The technology development programmer for the northern jiangsu area (BN2014019)
- Innovative Research Team of Anhui Provincial Education Department (2016SCXPTTD)
- Key Discipline of Material Science and Engineering of Suzhou University (2017XJZDXK3)
This publication has 30 references indexed in Scilit:
- The influence of electrolyte composition on the properties of Ni–Co alloy coatings reinforced by SiC nano-particlesSurface and Coatings Technology, 2015
- Proton transport through one-atom-thick crystalsNature, 2014
- Corrosion Resistance Enhancement of AZ91D Magnesium Alloy by Electroless Ni-Co-P Coating and Ni-Co-P-SiO2 NanocompositeJournal of Materials Engineering and Performance, 2014
- Corrosion resistance of Ni–Co alloy and Ni–Co/SiC nanocomposite coatings electrodeposited by sediment codeposition techniqueApplied Surface Science, 2014
- Effect of particle size and co-deposition technique on hardness and corrosion properties of Ni–Co/SiC composite coatingsSurface and Coatings Technology, 2012
- Direct electroless nickel–boron plating on AZ91D magnesium alloySurface and Coatings Technology, 2012
- Functional Graphene Oxide as a Nanocarrier for Controlled Loading and Targeted Delivery of Mixed Anticancer DrugsSmall, 2010
- Carbon nanotubes in biology and medicine: In vitro and in vivo detection, imaging and drug deliveryNano Research, 2009
- Effects of saccharin and cobalt concentration in electrolytic solution on microhardness of nanocrystalline Ni–Co alloysSurface and Coatings Technology, 2008
- Effects of bivalent Co ion on the co-deposition of nickel and nano-diamond particlesSurface and Coatings Technology, 2005