Microwave Frequency Dividers With Reconfigurable Fractional 2/N and 3/N Division Ratios
Open Access
- 20 March 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 29128-29137
Abstract
Two microwave photonic signal processing structures, which are capable to realise microwave frequency division with a tunable integer or non-integer division ratio, are presented. They are based on applying an input RF signal to a Mach Zehnder modulator, which is biased to generate a carrier-suppressed double sideband (DSB) or single sideband (SSB) optical signal. The carrier-suppressed DSB optical signal consists of the upper and lower 1 st order sidebands with a separation of two times the input RF signal frequency. The carrier of the SSB optical signal is suppressed by a fibre Bragg grating (FBG) connected to the modulator output. Hence the FBG output consists of the upper 1 st order and lower 2 nd order sidebands with a separation of three times the input RF signal frequency. The carrier-suppressed DSB or SSB optical signal is injected into a semiconductor laser. The semiconductor laser is oscillated in the period-one state that generates a number of equally spaced frequency components, which are frequency locked by the injection light wave. Beating of these optical frequency components at the photodetector produces an RF signal with a frequency of 2/ N or 3/ N times the input RF signal frequency where N can be between 3 and 6. Hence the 2/ N frequency divider can realise 2/3, 1/2, 2/5 and 1/3 frequency division operation, and the 3/ N frequency divider can realise 3/4, 3/5 and 1/2 frequency division operation. The proposed 2/ N and 3/ N frequency dividers have a very simple structure compared to the reported photonics-based microwave frequency divider that can realise both integer and non-integer frequency divisions. The frequency division ratio can be tuned by simply adjusting the forward bias current of the semiconductor laser subject to optical injection. Experimental results demonstrate the two proposed structures can realise microwave frequency division with a tunable integer and non-integer division ratio for different input RF signal frequencies of 10 to 18 GHz, and over 60 dB output signal-to-noise ratio performance. More than 27 dB suppression in the unwanted frequency components around the frequency divided signal is also demonstrated.Keywords
This publication has 21 references indexed in Scilit:
- Photonic microwave stabilization for period-one nonlinear dynamics of semiconductor lasers using optical modulation sideband injection lockingOptics Express, 2015
- Subharmonic Microwave Modulation Stabilization of Tunable Photonic Microwave Generated by Period-One Nonlinear Dynamics of an Optically Injected Semiconductor LaserJournal of Lightwave Technology, 2014
- Microwave Photonic Signal ProcessingJournal of Lightwave Technology, 2012
- Microwave Photonics—A Historical PerspectiveIEEE Transactions on Microwave Theory and Techniques, 2010
- A Theoretical and Experimental Study of Injection-Locked Fractional Frequency DividersIEEE Transactions on Microwave Theory and Techniques, 2008
- High Extinction Ratio Mach–Zehnder Modulator Applied to a Highly Stable Optical Signal GeneratorIEEE Transactions on Microwave Theory and Techniques, 2007
- Period-one oscillation for photonic microwave transmission using an optically injected semiconductor laserOptics Express, 2007
- Microwave frequency division and multiplication using an optically injected semiconductor laserIEEE Journal of Quantum Electronics, 2005
- Characteristics of Period-One Oscillations in Semiconductor Lasers Subject to Optical InjectionIEEE Journal of Selected Topics in Quantum Electronics, 2004
- Fractional-Frequency Generators Utilizing Regenerative ModulationProceedings of the IRE, 1939