Upscaling of perovskite solar modules: The synergy of fully evaporated layer fabrication and all‐laser‐scribed interconnections
Open Access
- 4 November 2021
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (4) , 360-373
Abstract
Given the outstanding progress in research over the past decade, perovskite photovoltaics (PV) is about to step up from laboratory prototypes to commercial products. For this to happen, realizing scalable processes to allow the technology to transition from solar cells to modules is pivotal. This work presents all‐evaporated perovskite PV modules with all thin films coated by established vacuum deposition processes. A common 532‐nm nanosecond laser source is employed to realize all three interconnection lines of the solar modules. The resulting module interconnections exhibit low series resistance and a small total lateral extension down to 160 μm. In comparison with interconnection fabrication approaches utilizing multiple scribing tools, the process complexity is reduced while the obtained geometrical fill factor of 96% is comparable with established inorganic thin‐film PV technologies. The all‐evaporated perovskite minimodules demonstrate power conversion efficiencies of 18.0% and 16.6% on aperture areas of 4 and 51 cm2, respectively. Most importantly, the all‐evaporated minimodules exhibit only minimal upscaling losses as low as 3.1%rel per decade of upscaled area, at the same time being the most efficient perovskite PV minimodules based on an all‐evaporated layer stack sequence.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Technologie (03EE1038B)
- Helmholtz Energy Materials Foundry
- Helmholtz-Gemeinschaft (VHNG‐1148, 38.01.04)
This publication has 122 references indexed in Scilit:
- Review of recent progress in chemical stability of perovskite solar cellsJournal of Materials Chemistry A, 2014
- A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stabilityScience, 2014
- Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic PerformanceThe Journal of Physical Chemistry Letters, 2014
- Solid-state solar modules based on mesoscopic organometal halide perovskite: a route towards the up-scaling processPhysical Chemistry Chemical Physics, 2014
- Novel concept for laser patterning of thin film solar cellsPhotonicsViews, 2012
- Next generation interconnective laser patterning of CIGS thin film modulesSolar Energy Materials and Solar Cells, 2011
- Laser Processing in Industrial Solar Module ManufacturingJournal of Laser Micro/Nanoengineering, 2010
- Laser patterning of P2 interconnect via in thin-film CIGS PV modulesSolar Energy Materials and Solar Cells, 2008
- Cadmium telluride PV module manufacturing at BP SolarProgress in Photovoltaics: Research and Applications, 2002
- Extraction of individual-cell photocurrents and shunt resistances in encapsulated modules using large-scale laser scanningProgress in Photovoltaics: Research and Applications, 1996