Characterization of VLSI circuit interconnect heating and failure under ESD conditions
Authors:
- A. AmerasekeraAAA. Amerasekera
- Chenming HuCHChenming Hu
- 1 January 1996
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 237-245
Abstract
The high current and ESD effects on VLSI interconnect metallization have been characterized and a model for heating under ESD conditions is presented. It is shown that thermal breakdown occurs when the resistances increase by a factor of >3.6 due to melting of metal lines. After the metal is molten, the thermal stress is required to exceed the fracture strength of the oxide/nitride layers in order for the overlying dielectric to be cracked and an open circuit to take place. The critical failure current is strongly influenced by the metal thickness and thermal capacity. It is shown that for current pulses below the failure threshold, the metal will return to its original solid state with no change in DC resistance, but it will have a lower electromigration lifetime. This is a potential latent failure. The model is applied to derive relations between critical current, line width and pulse width for determining design guidelines for ESD and I/O buffer interconnects.Keywords
This publication has 9 references indexed in Scilit:
- The impact of technology scaling on ESD robustness and protection circuit designIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1995
- EOS/ESD reliability of deep sub-micron NMOS protection devices1995
- Integrated circuit metal in the charged device model: bootstrap heating, melt damage, and scaling lawsJournal of Electrostatics, 1993
- ESD: a pervasive reliability concern for IC technologiesProceedings of the IEEE, 1993
- Mechanisms of Stress-Induced and Electromigration-Induced Damage in Passivated Narrow Metallizations on Rigid SubstratesMRS Bulletin, 1992
- Mechanical Characterization of Thin Films by Micromechanical TechniquesMRS Bulletin, 1992
- ESD in integrated circuitsQuality and Reliability Engineering International, 1992
- Super-Tough Silicon Nitride with R-Curve Behavior1989
- ESD on CHMOS Devices - Equivalent Circuits, Physical Models and Failure Mechanisms8th Reliability Physics Symposium, 1985