Study on the high‐temperature damping properties of silicone rubber modified by boron‐terminated polysiloxane
Authors:
- 21 October 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (1)
Abstract
Rubber damping materials have important applications in modern industrial systems. However, their damping temperature range is low, which is not suitable for the damping demand under high temperature conditions. At present, there is very little research on the damping performance of rubber under high temperature conditions. Silicone rubber has excellent high temperature resistance but poor damping in its application temperature range. In this study, a boron‐terminated polysiloxane (PBS) was prepared by modifying hydroxy‐terminated polydimethylsiloxane (PDMS‐OH) with boric acid (BA). The molecular structure of PBS was confirmed by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) analysis. Rheology measurements revealed that PBS was a “shear hardening” material. Then, the silicone rubber was modified with PBS. With the introduction of boron atoms, boron and oxygen dative bonds with dynamic properties could be formed inside the silicone rubber, which played an energy dissipation role in the process of association/dissociation. Dynamic mechanical analysis (DMA) showed that the loss factor (tan δ) of modified silicone rubber was greater than 0.3 in the temperature range of 81.5°C–250°C, which was higher than the loss temperature range of conventional damping rubber. The cyclic stress–strain test also showed that the modified silicone rubber still had high dissipation coefficient (DE) at high temperature. Therefore, the PBS‐modified silicone rubber prepared by this method achieved excellent damping performance under high temperature conditions.Keywords
This publication has 33 references indexed in Scilit:
- Polyborosiloxanes (PBSs), Synthetic Kinetics, and CharacterizationMacromolecules, 2014
- Elastic and viscous properties of Silly PuttyAmerican Journal of Physics, 2012
- Amidosulfobetaine surfactant gels with shear banding transitionsSoft Matter, 2010
- A study on mechanical and thermal properties of silicone rubber/EPDM damping materialsJournal of Applied Polymer Science, 2010
- Effect of diphenylsiloxane unit content on relaxation behavior of poly(dimethylsiloxane‐co‐diphenylsiloxane)Journal of Polymer Science Part B: Polymer Physics, 2008
- Experimental tests and analytical model of high damping rubber dissipating devicesEngineering Structures, 2006
- Damping Elastomer Based on Model Irregular Networks of End-Linked Poly(Dimethylsiloxane)Chemistry of Materials, 2003
- Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networksJournal of Applied Polymer Science, 2002
- Organically Modified SiO2−B2O3 Gels Displaying a High Content of Borosiloxane (B−O−Si⋮) BondsChemistry of Materials, 1999
- Damping modulus studies of poly(dimethylsiloxane)‐bisphenol‐a‐polycarbonate block copolymersPolymer Engineering & Science, 1985