Experimental Study of Dynamic Icing Process on a Pitot Probe Model
- 1 July 2023
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Thermophysics and Heat Transfer
- Vol. 37 (3) , 632-643
Abstract
An experimental study was conducted to characterize the dynamic ice accretion process over the surface of a typical aeronautic Pitot probe model under different icing conditions. The experimental study was conducted in the Icing Research Tunnel available at Iowa State University. While a high-speed imaging system was used to record the dynamic ice accretion process, a three-dimensional (3D) scanning system was also used to measure the 3D shapes of the ice layers accreted on the test model. While opaque and grainy ice structures were found to accrete mainly along the wedge-shaped lip of the front port and over the front surface of the probe holder under a dry rime icing condition, much more complicated ice structures with transparent and glazy appearance were observed to cover almost entire surface of the Pitot probe under a wet glaze icing condition. While a flower-like ice structure was found to grow rapidly along the front port lip, multiple irregular-shaped ice structures accreted over the probe holder under a mixed icing condition. The characteristics of the icing process under different icing conditions were compared in terms of 3D shapes of the ice structures, the profiles of the accreted ice layers, the ice blockage to the front port, and the total ice mass on the Pitot probe model. The acquired ice accretion images were correlated with the 3D ice shape measurements to elucidate the underlying icing physics.Keywords
Funding Information
- Division of Chemical, Bioengineering, Environmental and Transport Systems (CBET-1935363)
This publication has 26 references indexed in Scilit:
- The effect of low Reynolds number flows on pitot tube measurementsFlow Measurement and Instrumentation, 2015
- Runback ice formation mechanism on hydrophilic and superhydrophobic surfacesCold Regions Science and Technology, 2015
- A review of in-flight detection and identification of aircraft icing and reconfigurable controlProgress in Aerospace Sciences, 2013
- Convective Heat Transfer from a NACA Airfoil at Varying Angles of AttackJournal of Thermophysics and Heat Transfer, 2008
- Sensitivity of Aircraft Performance to Icing Parameter VariationsJournal of Aircraft, 2007
- Heat Transfer Coefficient Measurement on Iced Airfoil in Small Icing Wind TunnelJournal of Thermophysics and Heat Transfer, 2000
- Predicting Glaze or Rime Ice Growth on AirfoilsJournal of Aircraft, 2000
- Small-scale experiments on rime icingCold Regions Science and Technology, 1997
- Comparison of wet and dry growth in artificial and flight icing conditionsJournal of Thermophysics and Heat Transfer, 1987
- Icing of Pitot Static TubesJournal of the Aeronautical Sciences, 1938