A Study of the Crystallization Properties of CaO-SiO2-Al2O3 Glass Phase in Sinter
Open Access
Abstract
The glass phase is one of the binding phases in high-basicity sinter, which is mainly formed during a high-temperature cooling process while cannot crystallize in time. The phase still involves the “structure” information of the binding phase’s liquid phase in the sinter. In addition, the generation of glassy phases can seriously deteriorate the metallurgical properties of sintered ore. However, the formation mechanism and crystallization process of glass phases are still unclear. In this work, the glass phase and the crystallized samples of the CaO-SiO2-Al2O3 system were characterized using X-ray diffraction, optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy and Raman spectroscopy. The effect of alkalinity (R) and Al2O3 on crystallization and the relationship between crystallization and structure are discussed. The results showed that the chemical composition significantly influences the crystallization of the CaO-SiO2-Al2O3 glass. Decreasing basicity (R = 0.8–1.2, the mass ratio of CaO and SiO2) favors the crystallization of the glass phase, while increasing the content of Al2O3 (9–12%) can inhibit the crystallization of the glass phase. In addition, the crystallization order of the 45mass%CaO-45mass%SiO2-10mass%Al2O3 sample is CaSiO3 → CaAl2O4. Raman spectroscopic analysis showed that increase of slag basicity promoted the aggregation degree (Q3/Q2), resulting in deterioration of the glass phase crystallization. and that the glass phase crystallization deteriorated as the aggregation degree increased. However, increasing the Al2O3 content has little effect on the agglomeration degree but does promote the formation of SiO4 tetrahedra (Q0), which results in the deterioration of glass-phase crystallization.Keywords
Funding Information
- National Natural Science Foundation of China (51774029, U1460201)
This publication has 19 references indexed in Scilit:
- Assessment of CaO^|^ndash;Al2O3 Based Mold Flux System for High Aluminum TRIP CastingISIJ International, 2013
- Viscous Behavior of Alumina Rich Calcium-Silicate Based Mold Fluxes and Its Correlation to the Melt StructureISIJ International, 2013
- Silico-ferrite of Calcium and Aluminum (SFCA) Iron Ore Sinter Bonding Phases: New Insights into Their Formation During Heating and CoolingMetallurgical and Materials Transactions B, 2012
- Effect of Al2O3 on the viscosity and structure of calcium silicate-based melts containing Na2O and CaF2Journal of Non-Crystalline Solids, 2012
- Data Arrangement and Consideration of Evaluation Standard for Silico-Ferrite of Calcium and Alminum (SFCA) Phase in Sintering ProcessISIJ International, 2012
- The Influence of Different Iron Ores Mixtures Composition on the Quality of SinterISIJ International, 2010
- Influence of Al2O3and TiO2degradation behaviour of sinter and hematite at low temperatures on reductionIronmaking & Steelmaking: Processes, Products and Applications, 2002
- Stability of silico-ferrite of calcium and aluminum (SFCA) in air-solid solution limits between 1240 °C and 1390 °C and phase relationships within the Fe2O3-CaO-Al2O3-SiO2 (FCAS) systemMetallurgical and Materials Transactions B, 2002
- Effect of Raw Material Composition on the Mineral Phases in Lime-fluxed Iron Ore Sinter.ISIJ International, 1993
- Raman spectroscopy of calcium aluminate glasses and crystalsJournal of Non-Crystalline Solids, 1983