Dynamic Bearing Characteristics of Cement Concrete Pavement Under Heavy-Duty Loads
Open Access
Abstract
Cement concrete is a critical pavement construction material. However, under prolonged exposure to heavy traffic loads and the combined effects of multiple factors, it frequently exhibits premature slab failure and concurrent multiple defects, severely limiting its service performance and lifespan. The dynamic behavior of cement concrete pavement under heavy-load conditions and the influence of subgrade geometry and pavement width on dynamic bearing performance remain insufficiently understood. To address this issue, this study employs finite element software Abaqus 2020 to construct a three-dimensional finite element model of heavy-duty cement concrete pavement under six typical conditions, including uncut and unfilled subgrade, low embankment, high embankment, cut slope, and different pavement widths. Utilizing an implicit dynamic algorithm, the model simulates and analyzes the acceleration response, dynamic stress distribution, and evolution of strain energy density within the pavement structure under vehicle dynamic loading. The results indicate that the peak acceleration is highest for the uncut subgrade (159.214 m/s2) and lowest under the cut condition (146.566 m/s2), demonstrating that the cutting structure can effectively suppress pavement vibration intensity. Among subgrade types, high embankments exhibit the greatest capacity for reducing strain energy concentration; at the slab corners, the baseline strain energy density of 8.882 J/m3 is reduced by 4.2%, 7.8%, and 5.0% under low embankment, high embankment, and cut conditions, respectively. Regarding pavement width, wider configurations reduce slab vibration intensities, stored strain energy, peak stresses, and stress concentrations, benefiting long-term service life, but concurrently elevate slab corner strain energy accumulation, increasing the risk of corner fracture and compromising load-bearing capacity. These findings provide scientific and technical support for the structural design and performance optimization of heavy-duty cement concrete pavements.Keywords
Funding Information
- Zhejiang Ocean University (JX6311041723)
- Department of Education of Zhejiang Province (Y202560059)
This publication has 24 references indexed in Scilit:
- Tangential stiffness model of the joint surface considering contact angles between asperities based on fractal theoryApplied Mathematical Modelling, 2025
- Critical transverse differential settlement between modern tram pile-plank-supported subgrade and surrounding pavement subgradeTransportation Geotechnics, 2022
- Numerical investigation of load-induced fatigue cracking in curved ramp bridge deck pavement considering tire-bridge interactionConstruction and Building Materials, 2022
- Establishment of icing prediction model of asphalt pavement based on support vector regression algorithm and Bayesian optimizationConstruction and Building Materials, 2022
- Analytical solution based on state-space method for cracked concrete pavement subjected to arbitrary concentrated loadingConstruction and Building Materials, 2022
- Attenuation behavior of pavement concrete under rolling load and hydrodynamic pressure couplingConstruction and Building Materials, 2022
- GPR laboratory tests and numerical models to characterize cracks in cement concrete specimens, exemplifying damage in rigid pavementMeasurement, 2020
- Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander LoadStrength of Materials, 2018
- Accelerated pavement testing of thin RCC over soil cement pavementsInternational Journal of Pavement Research and Technology, 2016
- 2-D finite element analysis of rigid pavement considering dynamic vehicle–pavement interaction effectsApplied Mathematical Modelling, 2013