Enzymatic Electrode Obtained by Immobilizing of Urease into a Nanocomposite Film Based on Conducting Polymers and Different Additives
Authors:
- 20 February 2014
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 63 (11) , 549-556
Abstract
The nanocomposite film was obtained by electrochemical co-polymerization of the corresponding monomers in the presence of functionalized carbon nanotubes and different additives. By immobilizing urease on a modified electrode of type nanocomposite film/platinum substrate a novel amperometric biosensor for the detection of urea was prepared. The polymeric and nanocomposite films were utilized as conducting films for amperometric urea sensing after covalent immobilization of urease onto film-coated electrode. The electrochemical performance of the modified electrode was studied by cyclic voltammetry, chronoamperometry, and scanning electron microscopy. The immobilized urease on the nanocomposite film surface exhibited an excellent electrocatalytic response toward reduction urea. Amperometric response was measured as a function of urea concentration at a fixed potential, in this case the open circuit potential. The obtained sensor showed rapid response and good reversibility. The response time was less than 10 s, while the reversible time was about 5–15 s. The enzymatic nanostructured electrode exhibited high sensitivity, a wide linear range, and low detection limit for electrochemical detection of urea.Keywords
This publication has 40 references indexed in Scilit:
- Characterization and Electrical Properties of Poly(aniline-co-2,4-dimethoxyaniline) Nanostructures Prepared by Interfacial PolymerizationInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2013
- Dielectric Coating of Castor-Oil-Based Polyurethane Modified with Leucoemeralidine PolyanilineInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2013
- Review on Conducting Polymers and Their ApplicationsPolymer-Plastics Technology and Engineering, 2012
- Highly Sensitive Glucose Sensing With Multi-Walled Carbon Nanotubes – Polyaniline CompositePolymer-Plastics Technology and Engineering, 2012
- Fabrication of polyaniline/mesoporous carbon/MnO2 ternary nanocomposites and their enhanced electrochemical performance for supercapacitorsElectrochimica Acta, 2012
- Electrocatalytic activity of self-doped polyanilineElectrochimica Acta, 2012
- Self-doped polyaniline on functionalized carbon cloth as electroactive materials for supercapacitorElectrochimica Acta, 2012
- Electrochemical fabrication and capacitance of composite films of carbon nanotubes and polyanilineSurface and Interface Analysis, 2010
- Electrochemical capacitance of well-coated single-walled carbon nanotube with polyaniline compositesElectrochimica Acta, 2004
- Polypyrrole-based amperometric flow injection biosensor for ureaAnalytica Chimica Acta, 1996