CFD simulation of reverse water-hammer induced by collapse of draft-tube cavity in a model pump-turbine during runaway process
Open Access
- 1 November 2016
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 49 (5) , 052017
Abstract
This paper reports the preliminary progress in the CFD simulation of the reverse water-hammer induced by the collapse of a draft-tube cavity in a model pump-turbine during the runaway process. Firstly, the Fluent customized 1D-3D coupling model for hydraulic transients and the Schnerr & Sauer cavitation model for cavity development are introduced. Then, the methods are validated by simulating the benchmark reverse water-hammer in a long pipe caused by a valve instant closure. The simulated head history at the valve agrees well with the measured data in literature. After that, the more complicated reverse water-hammer in the draft-tube of a runaway model pump-turbine, which is installed in a model pumped-storage power plant, is simulated. The dynamic processes of a vapor cavity, from generation, expansion, shrink to collapse, are shown. After the cavity collapsed, a sudden increase of pressure can be evidently observed. The process is featured by a locally expending and collapsing vapor cavity that is around the runner cone, which is different from the conventional recognition of violent watercolumn separation. This work reveals the possibility for simulating the reverse water-hammer phenomenon in turbines by 3D CFD.Keywords
This publication has 11 references indexed in Scilit:
- Looping Dynamic Characteristics of a Pump-Turbine in the S-shaped Region During RunawayJournal of Fluids Engineering, 2016
- Simulation of the load rejection transient process of a francis turbine by using a 1-D-3-D coupling approachJournal of Hydrodynamics, 2014
- Simulation of Hydraulic Transients in Hydropower Systems Using the 1-D-3-D Coupling ApproachJournal of Hydrodynamics, 2012
- Parametric study of water column separation in Francis pump-turbine draft tubeLa Houille Blanche, 2012
- Numerical Prediction of Non-Cavitating and Cavitating Vortex Rope in a Francis Turbine Draft TubeStrojniški vestnik - Journal of Mechanical Engineering, 2011
- Study of cavitation in hydro turbines—A reviewRenewable and Sustainable Energy Reviews, 2010
- Water hammer with column separation: A historical reviewJournal of Fluids and Structures, 2006
- Mathematical Basis and Validation of the Full Cavitation ModelJournal of Fluids Engineering, 2002
- Pipeline Column Separation Flow RegimesJournal of Hydraulic Engineering, 1999
- Separated flow computations with the k-epsilon-v-squared modelAIAA Journal, 1995