Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel
- 4 November 2016
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (3) , 2350-2363
Abstract
Exploring new renewable energy sources as a substitute of petroleum reserves is necessary due to fulfilling the oncoming energy needs for industry and transportation systems. In this quest, a lot of research is going on to expose different kinds of new biodiesel sources. The non-edible oil from candlenut possesses the potential as a feedstock for biodiesel production. The present study aims to produce biodiesel from crude candlenut oil by using two-step transesterification process, and 10%, 20%, and 30% of biodiesel were mixed with diesel fuel as test blends for engine testing. Fourier transform infrared (FTIR) and gas chromatography (GC) were performed and analyzed to characterize the biodiesel. Also, the fuel properties of biodiesel and its blends were measured and compared with the specified standards. The thermal stability of the fuel blends was measured by thermogravimetric analysis (TGA) and differential scan calorimetry (DSC) analysis. Engine characteristics were measured in a Yanmar TF120M single cylinder direct injection (DI) diesel engine. Biodiesel produced from candlenut oil contained 15% free fatty acid (FFA), and two-step esterification and transesterification were used. FTIR and GC remarked the biodiesels’ existing functional groups and fatty acid methyl ester (FAME) composition. The thermal analysis of the biodiesel blends certified about the blends’ stability regarding thermal degradation, melting and crystallization temperature, oxidative temperature, and storage stability. The brake power (BP), brake specific fuel consumption (BSFC), and brake thermal efficiency (BTE) of the biodiesel blends decreased slightly with an increasing pattern of nitric oxide (NO) emission. However, the hydrocarbon (HC) and carbon monoxides (CO) of biodiesel blends were found decreased.Keywords
Funding Information
- High impact research grant, Ministry of higher education, Malaysia
This publication has 58 references indexed in Scilit:
- Combustion and emission of rapeseed oil blends in diesel engineApplied Energy, 2012
- A comprehensive review on biodiesel as an alternative energy resource and its characteristicsRenewable and Sustainable Energy Reviews, 2012
- Potential alternatives to edible oils for biodiesel production – A review of current workEnergy Conversion and Management, 2011
- Importance of algae oil as a source of biodieselEnergy Conversion and Management, 2011
- Determination of performance and combustion characteristics of a diesel engine fueled with canola and waste palm oil methyl estersEnergy Conversion and Management, 2011
- Use of algae as biofuel sourcesEnergy Conversion and Management, 2010
- Experimental studies on the combustion characteristics and performance of a direct injection engine fueled with biodiesel/diesel blendsEnergy Conversion and Management, 2010
- Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl esterApplied Thermal Engineering, 2010
- Effect of Spray and EGR Rate on the Combustion and Emission Characteristics of Biodiesel Fuel in a Compression Ignition EngineEnergy & Fuels, 2009
- Thermal stability evaluation of palm oil as energy transport mediaEnergy Conversion and Management, 2005