Influence of explosive density on mechanical properties of high manganese steel explosion hardened
Authors:
- 3 December 2013
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 114 (21) , 213507
Abstract
The explosion hardening tests of high manganese steel were carried out by using two kinds of explosives of the same composition but different density, respectively. The detonation velocities were tested and the relevant mechanical properties were studied. The results show that the stronger single impulse acting on the specimen, the more hardness of surface increases and the more impact toughness decreases. Compared with the explosive of 1.48 g/cm3 density, the hardness, elongation rate, and impact toughness of the sample for triple explosion with explosive of 1.38 g/cm3 density are larger at the same hardening depth. In addition, the tensile strength of the sample for triple explosion with density of 1.38 g/cm3 is higher from the surface to 15 mm below the surface hardened.Keywords
This publication has 13 references indexed in Scilit:
- Explosion Deformation and Hardening Behaviours of Hadfield Steel CrossingISIJ International, 2012
- Enhanced work hardening in Hadfield steel during explosive treatmentMaterials Letters, 2011
- Explosion hardening of Hadfield steel crossingMaterials Science and Technology, 2010
- Microstructure and Properties of Purity High Mn Steel Crossing Explosion HardenedISIJ International, 2008
- Shock-induced deformation twinning in tantalumActa Materialia, 1997
- The effects of explosive hardening on the mechanical properties and structure of HSLA steelsJournal of Materials Processing Technology, 1989
- Explosive strengthening of austenite steelsCombustion, Explosion, and Shock Waves, 1979
- Effects of detonation parameters on the hardening of 1Kh18N10T steelCombustion, Explosion, and Shock Waves, 1975
- Hugoniot Equation of State and the Effect of Shock Stress Amplitude and Duration on the Hardness of Hadfield SteelJournal of Applied Physics, 1970
- Explosive hardening of high-manganese steelCombustion, Explosion, and Shock Waves, 1966