Seismic Resilience and Design Factors of Inline Seismic Friction Dampers (ISFDs)
Open Access
Abstract
While damping devices can provide supplemental damping to mitigate building vibration due to wind or earthquake effects, integrating them into the design is more complex. For example, the Canadian code does not provide building designs with inline friction dampers. The objective of this present article was to study the overstrength, ductility, and response modification factors of concrete frame buildings with inline friction dampers in the Canadian context. For that purpose, a set of four-, eight-, and fourteen-story ductile concrete frames with inline seismic friction dampers, designed based on the 2015 National Building Code of Canada (NBCC), was considered. The analyses included pushover analysis in determining seismic characteristics and dynamic response history analysis using twenty-five ground motion records to assess the seismic performance of the buildings equipped with inline seismic friction dampers. The methodology considered diagonal braces, including different 6 m and 8 m span lengths. The discussion covers the prescribed design values for overstrength, ductility, and response modification factors, as well as the performance assessment of the buildings. The results revealed that increasing the height of the structure and reducing the span length increases the response modification factors.Keywords
This publication has 18 references indexed in Scilit:
- Seismic overstrength and ductility of concrete buildings reinforced with superelastic shape memory alloy rebarEngineering Structures, 2012
- Conditional Mean Spectrum: Tool for Ground-Motion SelectionJournal of Structural Engineering, 2011
- Generation of Uniform-Hazard Earthquake Ground MotionsJournal of Structural Engineering, 2011
- BRBF response modification factorJournal of Constructional Steel Research, 2009
- Seismic Design of Friction‐Damped Braced Frames Based on Historical RecordsEarthquake Spectra, 2005
- Evaluation of fractural mode of failure in steel structures following Kobe lessonsJournal of Constructional Steel Research, 2000
- Pros and cons of a pushover analysis of seismic performance evaluationEngineering Structures, 1998
- Design of yielding or friction-based dissipative bracings for seismic protection of buildingsEngineering Structures, 1995
- 6. Evaluation of Strength Reduction Factors for Earthquake‐Resistant DesignEarthquake Spectra, 1994
- 6. Seismic Response Control of Buildings Using Friction DampersEarthquake Spectra, 1993