Discussions on Correction of Goodman Jack Test
Authors:
- 28 February 2017
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 40 (2) , 199-209
Abstract
The Goodman jack is widely used to measure the deformation modulus of rock in the field. Although some corrections have been proposed for the jack in the research literature, the accuracy of the test remains unsatisfactory, and the results of the Goodman jack test are lower than the actual values. Based on the corrections proposed in the literature, we reported on two factors which may lead to a lower value of the Goodman jack test: one was the non-full rock/platen contact when the borehole is under- or over-sized (relative to the standard borehole with a diameter of 76.2 mm), and the other was the upper limitation on the applied hydraulic pressure. First, a numerical simulation was carried out to investigate the impact of the borehole diameter on the rock/platen contact and the calculated rock modulus. The results showed that when there is a deviation of 0.6 mm in the borehole diameter, the calculated rock modulus may be 2 to 5 times lower. Based on the results of numerical simulation, a borehole diameter-related correction is proposed for the tests in under- or over-sized boreholes. Second, to ensure that the rock responds elastically during the test, we analyzed the stress around the borehole, and based on the Mohr-Coulomb and tensile failure criteria, deduced the upper limitation for the applied hydraulic pressure. The results of a case study in a coal mine suggest that the pressure limitation is controlled by the initial stress in the field and the rock strength, and influenced significantly by the loading direction of the jack. Finally, based on the observations in the present research, a new procedure is suggested for the Goodman jack test, which may be helpful in improving the accuracy of in situ testing.Keywords
This publication has 15 references indexed in Scilit:
- A comparative assessment of rock mass deformation modulusInternational Journal of Mining Science and Technology, 2015
- Fracture initiation and propagation in intact rock – A reviewJournal of Rock Mechanics and Geotechnical Engineering, 2014
- The deformation modulus of rock masses — comparisons between in situ tests and indirect estimatesTunnelling and Underground Space Technology, 2001
- Suggested method for deformability determination a stiff dilatometerInternational Journal of Rock Mechanics and Mining Sciences, 1996
- A new modified borehole jack for stiff rockRock Mechanics and Rock Engineering, 1987
- The NX-borehole jack: A lesson in trials and errorsInternational Journal of Rock Mechanics and Mining Sciences, 1985
- Determining rock mass deformability: experience from case historiesInternational Journal of Rock Mechanics and Mining Sciences, 1978
- Modified borehole jack method for elastic property determination in rocksRock Mechanics and Rock Engineering, 1978
- NX borehole jack modulus determinations in homogeneous, isotropic, elastic materials : Report. 25F. US. BUR. Mines, RI, N7855, 1974, 50PInternational Journal of Rock Mechanics and Mining Sciences, 1974
- Numerical analyses of deformability tests in jointed rock ? ?Joint Perturbation? and ?No Tension? Finite Element solutionsRock Mechanics and Rock Engineering, 1971