High-Temperature-Resistant Epoxy Resin Gel Behavior and Profile Control in Heavy Oil Steam Drive
Open Access
Abstract
In recent years, the prominence of conformance control technology in heavy oil steam flooding has significantly increased in oilfield development. However, the high-temperature demands of heavy oil steam flooding require more resilient plugging agents. Resin-based plugging agents, known for their exceptional temperature resistance and strength, have emerged as a viable solution within this domain. Yet, they face issues like rapid curing at high temperatures and limited sealing reach. Thus, we introduce a novel approach: epoxy resin gel (EHRB), consisting of epoxy resin (ER) as the curing agent, urotropine (HMTA) and pyrocatechol (RO) as cross-linking agents, and n-butyl glycidyl ether (BGE) as a diluent. EHRB gels at 130 °C in 5.4 h, with curing commencing at 160 °C, extending resin curing time and expanding the sealing radius. This study assessed EHRB’s performance and high-temperature stability through displacement experiments, TGA, and DSC analysis. The results indicate that the EHRB has low viscosity, high compressive strength, and minimal mass loss at high temperatures. At 260 °C, the mass loss is less than 15%. The plugging rate exceeds 90%, and it can withstand steam flushing for over 6 PV. Additionally, it demonstrates a 17% improvement in EOR. EHRB demonstrates outstanding capabilities in proficient channel control for heavy oil steam flooding, offering vital technical support for conformance control in this challenging environment.Keywords
This publication has 35 references indexed in Scilit:
- A laboratory study of enhancing heavy oil recovery with steam flooding by adding nitrogen foamsJournal of Petroleum Science and Engineering, 2015
- Experimental study and application of tannin foam for profile modification in cyclic steam stimulated wellJournal of Petroleum Science and Engineering, 2014
- A new profile control design based on quantitative identification of steam breakthrough channel in heavy oil reservoirsJournal of Petroleum Exploration and Production Technology, 2013
- Field Application of Polymer Microspheres Flooding: A Pilot Test in Offshore Heavy Oil Reservoir2012
- Experimental Investigation of the Novel Phenol−Formaldehyde Cross-Linking HPAM Gel System: Based on the Secondary Cross-Linking Method of Organic Cross-Linkers and Its Gelation Performance Study after Flowing through Porous MediaEnergy & Fuels, 2011
- In-depth Profile Control Technologies in China—A Review of the State of the ArtPetroleum Science and Technology, 2010
- The Reservoir Suitability Studies of Nitrogen Foam Flooding in Shengli Oilfield2008
- Shrinkage control of low-profile unsaturated polyester resins cured at low temperaturePolymer, 1998
- Steam Distillation Drive-Brea Field, CaliforniaJournal of Petroleum Technology, 1972
- Laboratory Studies of Oil Recovery by Steam InjectionJournal of Petroleum Technology, 1961