Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation
- 28 July 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 102 (2) , 1234-1239
Abstract
Seven different polymers used frequently as adhesives and/or matrix polymers in wood, wood composites, and natural fiber‐reinforced composites were studied by uniaxial tensile tests and nanoindentation. It was shown that the elastic modulus, the hardness, the creep factor, and the elastic‐, plastic‐, and viscoelastic work of indentation of the seven different polymers is essentially the same regardless whether the polymers were tested in the form of pure films or in situ, i.e., in an adhesive bond line with spruce wood. An excellent correlation was found between the elastic modulus measured by tensile tests and the elastic modulus measured by nanoindentation. In spite of the good correlation, the elastic modulus measured by nanoindentation is significantly higher than the elastic modulus measured by tensile tests. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1234–1239, 2006Keywords
This publication has 21 references indexed in Scilit:
- A depth sensing indentation study of the hardness and modulus of adhesivesInternational Journal of Adhesion and Adhesives, 2005
- Nonlinear Viscoelastic Response of a Wood–Plastic Composite Including Temperature EffectsJournal of Thermoplastic Composite Materials, 2004
- The interphase in phenol–formaldehyde and polymeric methylene di-phenyl-di-isocyanate glue lines in woodInternational Journal of Adhesion and Adhesives, 2004
- Scaling, dimensional analysis, and indentation measurementsMaterials Science and Engineering: R: Reports, 2004
- Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentationComposites Part A: Applied Science and Manufacturing, 2002
- Discrete and continuous deformation during nanoindentation of thin filmsActa Materialia, 2000
- Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extractionScripta Materialia, 2000
- Determination of elastoplastic properties by instrumented sharp indentationScripta Materialia, 1999
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- A low-viscosity epoxy resin embedding medium for electron microscopyJournal of Ultrastructure Research, 1969