Additive‐Free Oxidized Spiro‐MeOTAD Hole Transport Layer Significantly Improves Thermal Solar Cell Stability
Open Access
- 6 June 2024
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (31)
Abstract
Perovskite solar cells are among the most promising new solar technologies, already surpassing polycrystalline silicon solar cell efficiencies. The stability of the highest efficiency devices at elevated temperature is, however, poor. These cells typically use Spiro‐MeOTAD as the hole transporting layer. It is generally believed that additives, required for enhancing electrical conductivity and optimizing energy level alignment, are responsible for the reduced stability—inferring that Spiro‐MeOTAD based hole transporting layers are intrinsically unstable. Here, a reliable noble metal free synthesis of Spiro‐MeOTAD (bis(trifluoromethane)sulfonimide)4 is presented which is used as the oxidizing agent. No additives are added to the partially oxidized Spiro‐MeOTAD hole‐transporting layer. Device efficiencies up to 24.2% are achieved. Electrical conductivity is largely developed by the first 1% oxidation. Further oxidation shifts the energy levels away from the vacuum level, which allows tuning of the energy level alignment without the use of additives—contradicting the current understanding of this system. Without additives, devices demonstrate significant improvement in stability at elevated temperatures up to 85 °C under one sun over 1400 h continuous illumination. The remaining degradation is pinpointed to ion migration and reactions in the perovskite layer which may be further suppressed with compositional engineering and adequate ion barrier layers.Keywords
Funding Information
- U.S. Department of Energy
- Solar Energy Technologies Office (DE‐EE0009512)
- Basic Energy Sciences (DE‐SC0021650)
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (P2EZP2_199844)
This publication has 12 references indexed in Scilit:
- Improving the stability of inverted perovskite solar cells towards commercializationCommunications Materials, 2022
- Oxidation of Spiro-OMeTAD in High-Efficiency Perovskite Solar CellsACS Applied Materials & Interfaces, 2022
- Mechanical Reliability of Fullerene/Tin Oxide Interfaces in Monolithic Perovskite/Silicon Tandem CellsACS Energy Letters, 2022
- Oxidized Spiro-OMeTAD: Investigation of Stability in Contact with Various Perovskite CompositionsACS Applied Energy Materials, 2021
- Protocol for Quantifying the Doping of Organic Hole-Transport MaterialsACS Energy Letters, 2019
- LiTFSI‐Free Spiro‐OMeTAD‐Based Perovskite Solar Cells with Power Conversion Efficiencies Exceeding 19%Advanced Energy Materials, 2019
- Evidence of Spiro-OMeTAD De-doping by tert-Butylpyridine Additive in Hole-Transporting Layers for Perovskite Solar CellsChem, 2019
- Effect of Selective Contacts on the Thermal Stability of Perovskite Solar CellsACS Applied Materials & Interfaces, 2017
- Enhancing the Hole-Conductivity of Spiro-OMeTAD without Oxygen or Lithium Salts by Using Spiro(TFSI)2 in Perovskite and Dye-Sensitized Solar CellsJournal of the American Chemical Society, 2014
- Lithium salts as “redox active” p-type dopants for organic semiconductors and their impact in solid-state dye-sensitized solar cellsPhysical Chemistry Chemical Physics, 2012