Analytical Methods for Following Short but Critical Events in Electrolyzer Operation

Authors:

Abstract
Renewable energy technologies, such as Power-to-X systems and battery storage, are expected to be capable of maintaining grid stability. However, rapid changes in current density can cause electrochemical, mechanical and thermal stresses on catalyst, electrodes and electrolyzer components. We, therefore, need methods to follow the immediate response of electrochemical devices to rapid changes in potential and current density to understand the immediate and long-term effects of these events and to develop robust systems. These methods should be ideally compatible with application-relevant cell types or better fully scale systems. We have developed a rapid gas analysis method, which can be directly connected to a CO 2 -electrolyzer employing state-of-the-art gas diffusion electrodes and operating in the range of 100-400mAcm -2 . [1] We were able to follow the first five minutes after the initial polarization of the cell and after stepping up the current density. For this purpose, we adapted the sample trapping GC method [2] for electrocatalysts and achieved a resolution of 15 s without losing any of the typical advantages of gas chromatography. In addition, we expanded the method by employing an online mass spectrometer [3,4] , using the experiment itself and the parallel GC data as an external standard. We compared both typical HCO 3 - and acidic ionic strength electrolytes [5] as well as electrodes with typical ink-based catalyst layer and such with catalysts applied by sputter deposition. We found that current density steps cause temporary changes in selectivity and initiate at least two relaxation processes with different time constants. We were able to identify these processes by combining electrochemical and fast online-analysis data. As a main result, however, we demonstrated the value of real-time product analysis for expanding the understanding of application electrocatalysis cells during critical points in operations. [1] Martens et al. Chemistry – Methods. 2025 , DOI: 10.1002/cmtd.202400092 [2] Zeeman et al. Rapid Commun. Mass Spectrom ., 2008, 22 , 3883−3892 [3] Clark et al. J. Am. Chem. Soc. 2018 , 140 , 7012−7020 [4] Englhard et al. Chemistry—Methods 2023 , 3 , e202300019 [5] Huang et al. Science, 2021, 372, 6546 1074–1078