Nanocomposites of PVC/TiO2 nanorods: Surface tension and mechanical properties before and after UV exposure
Authors:
- 21 February 2013
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 129 (6) , 3265-3272
Abstract
In this study, nanocomposites of poly(vinyl chloride) (PVC), using the synthesized titanium dioxide (TiO2) nanorods and commercial nanopowder of titanium dioxide (Degussa P25) were produced by melt blending. The presence of TiO2 nanorods in PVC matrix led to an improvement in mechanical properties of PVC nanocomposites in comparison with unfilled PVC. The photocatalytic degradation behavior of PVC nanocomposites were investigated by measuring their structural change evaluations, surface tension, and mechanical properties before and after UV exposure for 500 h. It was found that mechanical and physical properties of PVC nanocomposites are not reduced significantly after UV exposure in the presence of TiO2 nanorods in comparison with the presence of TiO2 nanoparticles, which can be due to the amorphous structure of the synthesized nanorods. Therefore, it can be concluded that TiO2 nanorods led to an improvement in photostability and mechanical properties of PVC nanocomposites. The interfacial adhesion between TiO2 nanorods and PVC matrix was also investigated. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 30 references indexed in Scilit:
- Mechanical behavior of silica nanoparticle-impregnated kevlar fabricsJournal of Mechanics of Materials and Structures, 2010
- Toughening of unmodified polyvinylchloride through the addition of nanoparticulate calcium carbonatePolymer, 2009
- Comparison of different photo-oxidation conditions of poly(vinyl chloride) for outdoor applicationsPolymer Testing, 2008
- Modification of polystyrene and poly(vinyl chloride) for the purpose of obtaining packaging materials degradable in the natural environmentPolymer Degradation and Stability, 2004
- Dynamic vulcanization of acrylic rubber‐blended PVCJournal of Applied Polymer Science, 2003
- The influence of UV-irradiation on poly(vinyl chloride) modified by iron and cobalt chloridesPolymer Degradation and Stability, 2003
- Assessment of strength and toughness of modified PVC pipesPlastics, Rubber and Composites: Macromolecular Engineering, 2001
- Mechanics of rubber particle cavitation in toughened polyvinylchloride (PVC)Polymer, 2000
- Tensile test of poly(vinyl chloride) filled with ground calcium carbonate particlesJournal of Applied Polymer Science, 1998
- Effect of morphology on the brittle ductile transition of polymer blends: 6. Influence of rubber particle spatial distribution on the toughening and stiffening efficiency of poly(vinyl chloride)/nitrile rubber blendsPolymer, 1998