Assessing the Influence of PEEK on Tribocorrosion in Metal on Polymer Total Joint Replacement
Open Access
- 16 July 2025
- journal article
- research article
- Published by Springer Nature in Tribology Letters
- Vol. 73 (3) , 1-19
Abstract
Tribocorrosion studies have primarily focused on hard-on-hard articulations, with limited research on metal-on-polymer (MoP) configurations despite their clinical relevance. This study investigates the tribocorrosion behaviour of cobalt-chromium (CoCr) alloy against 3D-printed polyetheretherketone (PEEK), conventionally manufactured PEEK, and ultrahigh molecular weight polyethylene (UHMWPE), with UHMWPE as the reference material. Tests were conducted using a reciprocating tribometer under open circuit and potentiostatic conditions in phosphate buffered saline (PBS) and bovine calf serum, with in-situ electrochemical monitoring. The results demonstrated that the presence of serum significantly decreased the charge transfer of the CoCr surface, hence decreasing electrochemical degradation when compared to PBS lubrication. The manufacturing methods for PEEK resulted in different surface characteristics, leading to variations in tribocorrosion behaviour; however, polishing to achieve homogeneous roughness minimized these differences. Furthermore, CoCr exhibited significantly higher charge transfer when slid against all tested PEEKs compared with UHMWPE (at least two-fold higher), suggesting that a PEEK-CoCr tribocouple results in an increase of tribocorrosion and a greater potential for metal ion release than a UHMWPE-CoCr tribocouple.Keywords
Funding Information
- European Union's Horizon 2020 (956004, 956004, 956004, 956004, 956004)
- Lulea University of Technology
This publication has 77 references indexed in Scilit:
- Thermo‐Mechanical and Structural Characterization of Isothermally Annealed 3D Printed Pseudo‐Amorphous Polyetherketoneketone (PEKK).Macromolecular Materials and Engineering, 2025
- Wear mechanism and debris analysis of PEEK as an alternative to CoCrMo in the femoral component of total knee replacementFriction, 2023
- A Comparative Tribocorrosion Study of Additive Manufactured and Wrought 316L Stainless Steel in Simulated Body FluidsJournal of Bio- and Tribo-Corrosion, 2018
- Wear-Corrosion Synergism in a CoCrMo Hip Bearing Alloy Is Influenced by ProteinsClinical Orthopaedics and Related Research, 2012
- Vitamin E diffused, highly crosslinked UHMWPE: a reviewInternational Orthopaedics, 2010
- Friction, lubrication, and polymer transfer between UHMWPE and CoCrMo hip‐implant materials: A fluorescence microscopy studyJournal of Biomedical Materials Research Part A, 2008
- Adsorption of albumin on prosthetic materials: Implication for tribological behaviorJournal of Biomedical Materials Research Part A, 2006
- Ion release in patients with metal‐on‐metal hip bearings in total joint replacement: A comparison with metal‐on‐polyethylene bearingsJournal of Biomedical Materials Research, 2002
- Friction and wear of PTFE — a reviewWear, 1992
- On the wear behaviour of short-fibre-reinforced peek compositesWear, 1987