Blast-Wave Clearing for Detonations of High Explosives
- 1 July 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 145 (7)
Abstract
When a blast wave impinges on the front face of a structure, rarefaction waves are formed along its free edges and propagate toward the center of the front face, and reduce the reflected overpressure: an effect known as clearing. Standards, guidelines and textbooks provide empirical equations to account for the effect of clearing. The clearing time is that instant at which the reflected overpressure decreases to the stagnation pressure. These empirical equations were used to calculate the reflected impulse for the design of a building loaded by a far-field detonation of a nuclear weapon. For such a detonation and a low-rise building, the incident shock front can be assumed to be vertical. This assumption is inappropriate for near-field detonations of high explosives because the reflected overpressure across the front face of a target varies with arrival time, standoff distance, and angle of incidence. There is little information on the effect of clearing in the literature for near-field (small-scaled distance) detonations. This paper presents the results of a computational fluid dynamics analysis of a validated numerical model that examines blast-wave clearing with an emphasis on near-field detonations. The widely used empirical equations for calculating clearing time are incorrect for near-field detonations and should not be used in design practice. Clearing in the near field is negligible and should be ignored for the purpose of design. Clearing in the far field will only be important for structural components of a width that is too narrow to be of practical importance. The physical experiments of two previous studies were simulated to gain insight into the development of the empirical equations that characterize the effects of clearing.Keywords
This publication has 12 references indexed in Scilit:
- Reflection Coefficients and Reflected Scaled Impulses from Detonations of High Explosives as a Function of Angle of IncidenceJournal of Structural Engineering, 2017
- Approach to Developing Design Charts for Quantifying the Influence of Blast Wave Clearing on Target DeformationJournal of Structural Engineering, 2017
- Incident and Normally Reflected Overpressure and Impulse for Detonations of Spherical High Explosives in Free AirJournal of Structural Engineering, 2015
- Numerical modeling of close-in detonations of high explosivesEngineering Structures, 2014
- A Numerical Investigation of Blast Loading and Clearing on Small TargetsInternational Journal of Protective Structures, 2014
- Prediction of clearing effects in far-field blast loading of finite targetsShock Waves, 2011
- Handbook for Blast‐Resistant Design of Buildings2010
- Blast effects on buildings2009
- Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded WallJournal of Pressure Vessel Technology, 2006
- Explosive Shocks in Air1985