Investigation of Relation between Straightness and Cutting Force in CNC Turning Process
Authors:
- 2 September 2015
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 789-790, 812-820
Abstract
The objective of this research is to examine the relation between the straightness and the cutting force ratio during the CNC turning process. The cutting force is monitored and obtained by installing the dynamometer on the turret of CNC turning machine. The relation between the cutting force ratio and the straightness is investigated under the various cutting conditions, which are the cutting speed, the feed rate, the depth of cut, the tool nose radius and the rake angle. The experimentally obtained results showed that the straightness can be improved with an increase in cutting speed, tool nose radius and rake angle. The relation between the dynamic cutting force and straightness profile can be proved by checking the frequency of the cutting force in frequency domain with the use of the Fast Fourier Transform (FFT), which is the same as the straightness profile. Hence, the cutting force ratio can be used to predict the straightness during the cutting regardless of the cutting conditions. The cutting force ratio is proposed to predict the straightness during turning process by employing the exponential function for the sake of straightness. The multiple regression analysis has been utilized to calculate the regression coefficients of the in-process prediction of straightness model by using the least square method at 95% confident level. It has been proved by the cutting tests that the in-process straightness can be predicted during the cutting within ±10% measured straightness with the high accuracy of 91.85%.Keywords
This publication has 16 references indexed in Scilit:
- Advanced Prediction of Surface Roughness by Monitoring of Dynamic Cutting Forces in CNC Turning ProcessApplied Mechanics and Materials, 2012
- In-Process Monitoring and Prediction of Surface Roughness in CNC Turning ProcessAdvanced Materials Research, 2011
- Advanced Monitoring of Tool Wear and Cutting States in CNC Turning Process by Utilizing Sensor FusionAdvanced Materials Research, 2011
- Analysis and control of dimensional precision in turning process2009
- Development of Intelligent Identification of Cutting States by Spectrum Analysis for CNC TurningJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2008
- Inspection of the cylindrical surface feature after turning using coordinate metrologyInternational Journal of Machine Tools and Manufacture, 2007
- A united model of diametral error in slender bar turning with a follower restInternational Journal of Machine Tools and Manufacture, 2006
- The estimation of the diameter error in bar turning: a comparison among three cutting force modelsThe International Journal of Advanced Manufacturing Technology, 2003
- Synthesis of the multi-step straightness control system for shaft straightening processesMechatronics, 2002
- In-process evaluation of workpiece geometrical tolerances in bar turningInternational Journal of Machine Tools and Manufacture, 1996