Tetrahedral amorphous carbon prepared filter cathodic vacuum arc for hole transport layers in perovskite solar cells and quantum dots LEDs
Authors:
Open Access
- 20 December 2019
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 20 (1) , 1118-1130
Abstract
In this study, we demonstrated the feasibility of using tetrahedral amorphous carbon (ta-C) films coated through the filtered cathodic vacuum arc (FCVA) process as a hole transport layer (HTL) for perovskite solar cells (PSCs) and quantum dots light-emitting diodes (QDLEDs). The p-type ta-C film has several remarkable features, including ease of fabrication without the need for thermal annealing or any other post-treatment, reasonable electrical conductivity, optical transmittance, good chemical stability, and a high work function. Therefore, we present a simple and effective method to improve the performance of PSCs and QDLEDs by applying ta-C films as a HTL. X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy examinations show that the electrical properties (sp3/sp2 hybridized bond) and work function of the ta-C HTL are appropriate for PSCs and QDLEDs. In addition, in order to correlate the performance of the devices, the optical, surface morphological, and structural properties of the FCVA-grown ta-C films with different thicknesses (5 ~ 20 nm) deposited on the ITO anode are investigated in detail. The optimized ta-C film with a thickness of 5 nm deposited on the ITO anode had a sheet resistance 10.33 Ohm/square, a resistivity of 1.34 × 10−4 Ohm-cm, and an optical transmittance of 88.97%. Compared to the reference PSC with p-NiO HTL, the PSC with 5 nm thick ta-C HTL yielded a higher power conversion efficiency (PCE, 10.53%) due to its improved fill factor. Further, performance of QDLEDs with 5 nm thick ta-C hole injection layers (HIL) showed better than performance of QDLEDs with different ta-C thicknesses. It is concluded that FCVA grown ta-C films have the potential to serve as HTL and HIL in next-generation PSCs and QDLEDs.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (0163010012200)
- National Research Foundation of Korea (2018R1A2B2003826)
This publication has 63 references indexed in Scilit:
- High-efficiency quantum-dot light-emitting devices with enhanced charge injectionNature Photonics, 2013
- 6.5% efficient perovskite quantum-dot-sensitized solar cellNanoscale, 2011
- Effect of ambient gaseous environment on the properties of amorphous carbon thin filmsMaterials Chemistry and Physics, 2011
- A perspective on the optimisation of hard carbon and related coatings for engineering applicationsThin Solid Films, 2007
- Degradation of organic solar cells due to air exposureSolar Energy Materials and Solar Cells, 2006
- Electronic structure studies of undoped and nitrogen-doped tetrahedral amorphous carbon using high-resolution electron energy-loss spectroscopyJournal of Applied Physics, 2001
- Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodesApplied Physics Letters, 2000
- Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc depositionDiamond and Related Materials, 2000
- Properties of nitrogen doped tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc techniqueJournal of Non-Crystalline Solids, 1998
- Spectroscopic ellipsometry studies of tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc techniqueThin Solid Films, 1998