Control Technology of Soft Rock Floor in Mining Roadway with Coal Pillar Protection: A case study
Open Access
Abstract
This study considered the mining roadway with coal pillar protection in the fully mechanized caving face of the Dananhu No.1 Coal Mine, China. Theoretical analysis, numerical simulation, and field tests were conducted, and the stress environment, deformation, and failure characteristics of the mining roadway in the fully mechanized caving face were analyzed. The results revealed that the intrinsic cause for the large asymmetrical floor deformation in the mining roadway is the asymmetrical phenomenon of the surrounding rock’s stress environment, caused by mining. This also results in the non-uniform distribution of the mining roadway floor’s plastic zone. The degree of asymmetrical floor heave is internally related to the thickness of the caving coal. When the thickness of the caving coal was in the range of 5.9 m, the deformation of the asymmetrical floor heave, caused by the plastic failure in the floor, became more obvious as certain parameters increased. As the rotation angle of the principal stress direction increased, the maximum plastic failure depth position of the floor gradually moved toward the middle of the roadway. This caused a different distribution for the maximum deformation position. The control of the floor heave deformation was poor, and it was not feasible to use high-strength support under the existing engineering conditions. Hence, the control should mainly be applied to the floor heave deformation. When the thickness of the caving coal was more than 5.9 m, the main roof strata was prone to instability and being cut along the edge of the coal pillar; the rock stress environment surrounding the roadway tended to revert back to the initial geostress state. The proposed floor heave control strategy achieved good results, and as the deformation of the floor heave decreased, the workload of the floor heave was also greatly reduced.Keywords
Funding Information
- National Natural Science Foundation of China (51674098, 51604094)
This publication has 14 references indexed in Scilit:
- Mechanism for Controlling Floor Heave of Mining Roadways Using Reinforcing Roof and Sidewalls in Underground Coal MineSustainability, 2018
- An experimental study of the vibration of a drill rod during roof bolt installationInternational Journal of Rock Mechanics and Mining Sciences, 2018
- A physical and numerical investigation of sudden massive roof collapse during longwall coal retreat miningInternational Journal of Coal Geology, 2018
- Floor Heave Mechanism of Gob-Side Entry Retaining with Fully-Mechanized Backfilling MiningEnergies, 2017
- Physical modeling of floor heave for the deep-buried roadway excavated in ten degree inclined strata using infrared thermal imaging technologyTunnelling and Underground Space Technology, 2017
- Investigation on the Influence of Abutment Pressure on the Stability of Rock Bolt Reinforced Roof Strata Through Physical and Numerical ModelingRock Mechanics and Rock Engineering, 2016
- Influence of fracture-induced weakening on coal mine gateroad stabilityInternational Journal of Rock Mechanics and Mining Sciences, 2016
- An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Field investigations of high stress soft surrounding rocks and deformation controlJournal of Rock Mechanics and Geotechnical Engineering, 2015
- Partitioning characteristics of gas channel of coal-rock mass in mining space and gas orientation methodInternational Journal of Mining Science and Technology, 2013