Incorporating the Stress History Parameter KD of DMT into the Liquefaction Correlations in Clean Uncemented Sands
Open Access
- 1 February 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 142 (2)
Abstract
This paper analyzes the possibility of reducing the uncertainty of the cyclic resistance ratio (CRR) estimates by incorporating stress history into the liquefaction correlations. A way of obtaining this objective stems from the combination of two well-recognized notions: (1) sensitivity of the flat dilatometer test (DMT) parameter KD to stress history, and (2) necessity of stress history information to obtain better estimates of the liquefaction resistance. The main aim of this paper is to develop a framework providing CRR estimates based not on the one-to-one correlations CRR-Qcn or CRR-KD, but on a correlation based at the same time on both Qcn and KD. A Qcn-KD-CRR correlation has been constructed by combining the current CRR-Qcn and CRR-KD correlations. It is expectable that an estimate based at the same time on two measured parameters is more accurate than estimates based on just one parameter. 'A chart is presented providing estimates of CRR based at the same time on both Qcn and KD.Keywords
This publication has 10 references indexed in Scilit:
- Overconsolidation and Stiffness of Venice Lagoon Sands and Silts from SDMT and CPTUJournal of Geotechnical and Geoenvironmental Engineering, 2014
- Effect of stress history on CPT and DMT results in sandEngineering Geology, 2011
- Simplified DMT-based methods for evaluating liquefaction resistance of soilsEngineering Geology, 2009
- Relations between Penetration Resistance and Cyclic Strength to Liquefaction as Affected by KC-Conditions2008
- Discussion of “Accounting for Soil Aging When Assessing Liquefaction Potential” by Evangelia Leon, Sarah L. Gassman, and Pradeep TalwaniJournal of Geotechnical and Geoenvironmental Engineering, 2007
- Semi-empirical procedures for evaluating liquefaction potential during earthquakesSoil Dynamics and Earthquake Engineering, 2006
- Liquefaction Resistance of Soils: Summary Report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Evaluating cyclic liquefaction potential using the cone penetration testCanadian Geotechnical Journal, 1998
- Lateral Stress Effects on CPT Liquefaction Resistance CorrelationsJournal of Geotechnical and Geoenvironmental Engineering, 1997
- Estimating Liquefaction Potential of Sands Using the Flat Plate DilatometerGeotechnical Testing Journal, 1986