Enable Batteryless Flex-sensors via RFID Tags
Author:
- 17 May 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Abstract
Flex-angle detection of objects or human bodies has potential applications in robotic arm control, medical rehabilitation, and deformation detection. However, current solutions such as flex sensors and computer vision methods have limitations, such as the limited system lifetime of battery-powered flex sensors and the failure of computer vision methods in Non-Line-of-Sight (NLoS) scenarios. To overcome these limitations, we propose an RFID-based flex-sensor system, called RFlexor, which enables batteryless flex-angle detection in NLoS scenarios. RFlexor utilizes the change in tag phase and Received Signal Strength Indicator (RSSI) caused by the flexing of the tag to detect flex-angles. To extract the complex relationship between tag phase/RSSI and flex-angle, we train a multi-input AI model. We address the significant technical challenges by reformulating the phase and RSSI models, using phase difference and RSSI ratio as inputs, and applying multi-head attention to fuse phase and RSSI data. We implement the RFlexor system using Commercial-Off-The-Shelf (COTS) RFID devices and conduct extensive experiments. The results show that RFlexor achieves fine-grained flex-angle detection with a detection error of fewer than 10 degrees and a probability higher than 90% in most conditions. The average detection error is always less than 10 degrees across all experiments. Overall, RFlexor provides a promising solution for flex-angle detection in various scenarios.Keywords
Funding Information
- National Natural Science Foundation of China
This publication has 29 references indexed in Scilit:
- Learning Food Quality and Safety from Wireless Stickers2018
- Self-Tuning RFID Tag: A New Approach for Temperature SensingIEEE Transactions on Microwave Theory and Techniques, 2018
- RF-Dial: An RFID-based 2D Human-Computer Interaction via Tag Array2018
- RF-KinectProceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies, 2018
- RIO2017
- Tag-compass: Determining the spatial direction of an object with small dimensions2017
- RF-scanner: Shelf scanning with robot-assisted RFID systems2017
- Gyro in the air2016
- STPP: Spatial-Temporal Phase Profiling-Based Method for Relative RFID Tag LocalizationIEEE/ACM Transactions on Networking, 2016
- RFID Handbook2010