Gate driver with feed forward control of turn off performances of an IGBT in short circuit conditions
Author:
- 1 January 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 1-10
Abstract
This paper presents a short overview of an IGBT short circuit failure due to over-voltage, and discusses some protection methods. Every new generation of high power IGBT becomes faster and faster, with the collector current fall time of less than 100 ns, sometimes even 50 ns. Fast switching of the collector current, especially at current of 200 A or more, introduces a problem of turn off over- voltage. In case of overload or short circuit, the peak voltage on IGBT may exceed the break down voltage. As a result, the device can catastrophically fail in several tens of nanoseconds after collapse of the collector emitter voltage. To prevent a catastrophic failure, an advanced gate drive circuit has to be used instead of a standard gate drive with pure resistive gate control. A novel IGBT gate driver based on feed-forward control of the collector current slope and the collector emitter over-voltage in short circuit conditions is presented in this paper.Keywords
This publication has 9 references indexed in Scilit:
- Power Semiconductors2006
- Active Voltage Control of IGBTs for High Power ApplicationsIEEE Transactions on Power Electronics, 2004
- Fast clamped short circuit protection of IGBTs2002
- Busbar design considerations for high power IGBT converters2002
- New electrolytic capacitors with low inductance simplify inverter2002
- Failure dynamics of the IGBT during turn-off for unclamped inductive loading conditionsIEEE Transactions on Industry Applications, 2000
- Characterization of power electronics system interconnect parasitics using time domain reflectometryIEEE Transactions on Power Electronics, 1999
- Switching-behavior improvement of insulated gate-controlled devicesIEEE Transactions on Power Electronics, 1997
- Gate-Controlled dv/dt- and di/dt-Limitation in High Power IGBT ConvertersEPE Journal, 1996