Fast Demagnetization and Vibration Reduction in Switched Reluctance Motor Drive System
Open Access
- 9 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 110904-110915
Abstract
In this paper, a Switched Reluctance Motor (SRM) drive system is proposed to make a trade-off between torque profile and vibration amplitude. In the proposed drive system, the power factor correction and fast demagnetization are achieved using a single-phase Vienna rectifier as a front-end converter for SRMs with a nominal voltage equal to half DC-link voltage. The three-level Vienna rectifier provides doubled negative voltage in demagnetization, resulting in a shorter current tail and faster demagnetization. But, applying higher voltage in demagnetization has a negative impact on the vibration amplitude at the point of demagnetization. Therefore, a control algorithm is designed to apply a negative modulated voltage to the motor phase, with a minimum change rate at the beginning of demagnetization and a linear average during the demagnetization interval. Accordingly, the mitigation of the vibration occurring at the commutation point and prevention of negative torque are simultaneously achieved over a wide speed range. The simulation and experimental results demonstrate the proposed drive system’s positive effect on the vibration amplitude, grid side current quality, and SRM performance in a wide range of speed variations.Keywords
This publication has 18 references indexed in Scilit:
- Radial forces and vibration analysis in an external‐rotor switched reluctance machineIET Electric Power Applications, 2017
- Switched reluctance motor drive converter operating in continuous conduction mode with high demagnetisation voltageIET Power Electronics, 2015
- Digital PWM-Control-Based Active Vibration Cancellation for Switched Reluctance MotorsIEEE Transactions on Industry Applications, 2015
- Analysis, design and control of single‐phase three‐level power factor correction rectifier fed switched reluctance motor driveIET Power Electronics, 2014
- Prediction of Radial Vibration in Switched Reluctance MachinesIEEE Transactions on Energy Conversion, 2013
- Double-Stator Switched Reluctance Machines (DSSRM): Fundamentals and Magnetic Force AnalysisIEEE Transactions on Energy Conversion, 2010
- Vibration prediction in switched reluctance motors with transfer function identification from shaker and force hammer tests2003
- Reduction of noise and vibration in switched reluctance motors: new aspects2002
- Stator pole and yoke design for vibration reduction of switched reluctance motorIEEE Transactions on Magnetics, 2002
- A novel three-phase utility interface minimizing line current harmonics of high-power telecommunications rectifier modulesIEEE Transactions on Industrial Electronics, 1997