Nonlinear restructuring of patterned thin films by residual stress engineering into out-of-plane wavy-shaped electrostatic microactuators for high-performance radio-frequency switches
Open Access
- 7 June 2023
- journal article
- research article
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 9 (1) , 1-13
Abstract
Electrostatic microelectromechanical (MEMS) switches are the basic building blocks for various radio-frequency (RF) transceivers. However, conventional cantilever-based designs of MEMS switches require a large actuation voltage, exhibit limited RF performance, and suffer from many performance tradeoffs due to their flat geometries restricted in two dimensions (2D). Here, by leveraging the residual stress in thin films, we report a novel development of three-dimensional (3D) wavy microstructures, which offer the potential to serve as high-performance RF switches. Relying on standard IC-compatible metallic materials, we devise a simple fabrication process to repeatedly manufacture out-of-plane wavy beams with controllable bending profiles and yields reaching 100%. We then demonstrate the utility of such metallic wavy beams as RF switches achieving both extremely low actuation voltage and improved RF performance owing to their unique geometry, which is tunable in three dimensions and exceeds the capabilities of current state-of-the-art flat-cantilever switches with 2D-restricted topology. As such, the wavy cantilever switch presented in this work actuates at voltages as low as 24 V while simultaneously exhibiting RF isolation and insertion loss of 20 dB and 0.75 dB, respectively, for frequencies up to 40 GHz. Wavy switch designs with 3D geometries break through the design limits set by traditional flat cantilevers and provide an additional degree of freedom or control knob in the switch design process, which could enable further optimization of switching networks used in current 5G and upcoming 6G communication scenarios.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (118E842, 118E842)
- Türkiye Bilimler Akademisi (TUBA GEBIP-2021)
- Sabanci University
- Higher Education Commision, Pakistan
This publication has 31 references indexed in Scilit:
- High-Power High-Isolation RF-MEMS Switches With Enhanced Hot-Switching Reliability Using a Shunt Protection TechniqueIEEE Transactions on Microwave Theory and Techniques, 2017
- Extension of the Hot-Switching Reliability of RF-MEMS Switches Using a Series Contact Protection TechniqueIEEE Transactions on Microwave Theory and Techniques, 2016
- Nanoscale memristive radiofrequency switchesNature Communications, 2015
- Precision Structural Engineering of Self-Rolled-up 3D Nanomembranes Guided by Transient Quasi-Static FEM ModelingNano Letters, 2014
- Hot switching damage mechanisms in MEMS contacts—evidence and understandingJournal of Micromechanics and Microengineering, 2014
- A Complementary Dual-Contact MEMS Switch Using a “Zipping” TechniqueJournal of Microelectromechanical Systems, 2013
- Miniature MEMS Switches for RF ApplicationsJournal of Microelectromechanical Systems, 2011
- A low actuation voltage electrostatic actuator for RF MEMS switch applicationsJournal of Micromechanics and Microengineering, 2007
- RF MEMS Switches With Enhanced Power-Handling CapabilitiesIEEE Transactions on Microwave Theory and Techniques, 2004
- RF MEMS switches and switch circuitsIEEE Microwave Magazine, 2001