A Personal, Thermophoretic Sampler for Airborne Nanoparticles
Authors:
Open Access
- 26 February 2011
- journal article
- research article
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 45 (6) , 744-750
Abstract
Engineered nanoparticles possess unique properties that present potential health risks to the workers who manufacture them and to consumers who are directly or inadvertently exposed to them. Monitoring personal exposures to these materials is necessary to evaluate such potential risks. A thermal precipitator was designed to measure concentrations of airborne nanoparticles in the breathing zone of exposed individuals. Particle collection efficiency was evaluated at flow rates of 5 and 20 mL/min and for particle sizes ranging from 15 to 240 nm. Particle transmission efficiency (with the temperature gradient off) and uniformity of particle deposition across the collection surface were also evaluated. Particle collection efficiency ranged from 100% at 5 mL/min flow to approximately 50% at 20 mL/min. Particle collection was generally homogeneous near the center of the collection plate over a distance of approximately 2 mm. Particle collection was less uniform near the edges of the collection plate, with a tendency for increased deposition near the inlet and flow centerline.Keywords
This publication has 20 references indexed in Scilit:
- A Handheld Electrostatic Precipitator for Sampling Airborne Particles and NanoparticlesAerosol Science and Technology, 2010
- Issues in the Development of Epidemiologic Studies of Workers Exposed to Engineered NanoparticlesJournal of Occupational and Environmental Medicine, 2009
- Airborne Monitoring to Distinguish Engineered Nanomaterials from Incidental Particles for Environmental Health and SafetyJournal of Occupational and Environmental Hygiene, 2008
- Exposure to Manufactured Nanostructured Particles in an Industrial Pilot PlantAnnals of Occupational Hygiene, 2008
- Monitoring Multiwalled Carbon Nanotube Exposure in Carbon Nanotube Research FacilityInhalation Toxicology, 2008
- A Thermophoretic Precipitator for the Representative Collection of Atmospheric Ultrafine Particles for Microscopic AnalysisAerosol Science and Technology, 2007
- Safe handling of nanotechnologyNature, 2006
- Research Strategies for Safety Evaluation of Nanomaterials, Part VIII: International Efforts to Develop Risk-Based Safety Evaluations for NanomaterialsToxicological Sciences, 2006
- Personal Exposure to Ultrafine Particles in the Workplace: Exploring Sampling Techniques and StrategiesAnnals of Occupational Hygiene, 2004
- Translocation of Inhaled Ultrafine Particles to the BrainInhalation Toxicology, 2004