Shape estimation and health monitoring of wind turbine tower using a FBG sensor array
- 1 May 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10915281,p. 496-500
Abstract
This paper introduces a high-speed fiber Bragg grating (FBG) sensor system for use in shape estimation of wind turbine tower under dynamic loads. A fiber Bragg grating interrogator was developed with a spectrometer-type demodulator based on a linear photo detector. In the high-speed demodulation mode, up to six arrayed FBGs can conduct 40 kHz sampling per each channel simultaneously, and in the low-speed demodulation mode, the system can be effectively used for the dynamic strain monitoring of large structures that require many sensors, by expansion of the sensing channels. Real-time shape estimation of the wind turbine tower structure was accomplished using strain data gathered by surface mounted fiber Bragg grating sensors. The finite element model of the wind turbine tower was created and a displacement-strain transformation based on a modal approach was applied to find the displacement-strain transformation (DST) matrix. The estimated shapes measured by ten Bragg grating sensors are analyzed for two operational load cases of wind turbine. The results show very close agreement showing the potentials of the proposed shape estimation technique based on displacement-strain transformation using Bragg grating sensors.Keywords
This publication has 6 references indexed in Scilit:
- Displacement field estimation for a two-dimensional structure using fiber Bragg grating sensorsSmart Materials and Structures, 2009
- Structural health monitoring for a wind turbine system: a review of damage detection methodsMeasurement Science and Technology, 2008
- Condition monitoring benefit for onshore wind turbines: sensitivity to operational parametersIET Renewable Power Generation, 2008
- Estimation of dynamic structural displacements using fiber Bragg grating strain sensorsJournal of Sound and Vibration, 2007
- Simultaneous measurement of strain, temperature and vibration frequency using a fibre optic sensorMeasurement Science and Technology, 2002
- HIGH-PRECISION MEASUREMENT OF TOOL-TIP DISPLACEMENT USING STRAIN GAUGES IN PRECISION FLEXIBLE LINE BORINGMechanical Systems and Signal Processing, 1999