Design and Optimization of a Low-Cost Hybrid-Pole Rotor for Spoke-Type Permanent Magnet Machine
- 21 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (2) , 1-5
Abstract
In this article, a novel spoke-type permanent magnet (PM) machine with two types of PM materials is proposed to reduce the cost. In order to improve torque density and reduce torque ripple, the multi-objective optimization combined finite element method (FEM) and genetic algorithm (GA) are used. In addition, the electromagnetic performances of the novel spoke-type PM machine, including no-load air-gap flux density, electromagnetic torque, torque ripple, efficiency, and cost are compared with the conventional spoke-type PM machine. It is demonstrated that the novel spoke-type PM machine obtains a 1.5% lower torque ripple and 36% lower cost, and the torque density is 4.3% lower than the conventional spoke-type PM machine. Meanwhile, the novel spoke-type PM machine has lower core loss and higher efficiency. Finally, a 40 kW spoke-type PM machine is manufactured to verify the analyzing method. Experimental results demonstrate that the proposed machine exhibits high torque density and low cost in the application of electric vehicles (EVs).Keywords
Funding Information
- Jiangsu Provincial Key Research and Development Project (BE2017160)
This publication has 10 references indexed in Scilit:
- Reduction of high-frequency vibration noise for dual-branch three-phase permanent magnet synchronous motorsChinese Journal of Electrical Engineering, 2020
- Ferrite Permanent Magnets in Electrical Machines: Opportunities and Challenges of a Non-Rare-Earth AlternativeIEEE Transactions on Magnetics, 2020
- Design and Multi-Objective Stratified Optimization of a Less-Rare-Earth Hybrid Permanent Magnets Motor With High Torque Density and Low CostIEEE Transactions on Energy Conversion, 2018
- Comparative Study of PM-Assisted SynRM and IPMSM on Constant Power Speed Range for EV ApplicationsIEEE Transactions on Magnetics, 2017
- Opportunities and Challenges of Switched Reluctance Motor Drives for Electric Propulsion: A Comparative StudyIEEE Transactions on Transportation Electrification, 2017
- Co-Reduction of Torque Ripple for Outer Rotor Flux-Switching PM Motor Using Systematic Multi-Level Design and Control SchemesIEEE Transactions on Industrial Electronics, 2016
- Comparative Study on Novel Dual Stator Radial Flux and Axial Flux Permanent Magnet Motors With Ferrite Magnets for Traction ApplicationIEEE Transactions on Magnetics, 2014
- Low-Cost Ferrite PM-Assisted Synchronous Reluctance Machine for Electric VehiclesIEEE Transactions on Industrial Electronics, 2014
- Interior PM Machines Using Ferrite to Replace Rare-Earth Surface PM MachinesIEEE Transactions on Industry Applications, 2013
- Characteristics Comparison of a Conventional and Modified Spoke-Type Ferrite Magnet Motor for Traction Drives of Low-Speed Electric VehiclesIEEE Transactions on Industry Applications, 2013