Design and Analysis of a GaN-Based Megahertz Integrated Motor Drive for a PCB Motor
- 16 May 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15435-15444
Abstract
Printed circuit board (PCB) motors present a compelling alternative to commercial electric motors due to their cost-effective mass production. Furthermore, integrated motor drives have gained popularity thanks to their high power density and ease of installation. However, PCB motors face challenges due to their large effective air gap and fewer turns, resulting in low phase inductance. This article addresses these challenges by pairing the PCB motor with wide-bandgap devices and increasing the switching frequency to eliminate current ripple while reducing the size of filtering components, ultimately achieving a compact and efficient motor drive. The study explores various filtering options and decides upon for an L filter with line inductors on the motor phases. The losses of the system are analytically evaluated to a great extend leading to a selection of the switching frequency which is 1 MHz. Theoretical loss calculations are validated for both the electrical machine and inverter by means of calorimetric and electrical measurements. Finally, the integrated system is tested in motoring mode, operating at 5000 rpm and delivering 0.36 Nm of torque, resulting in an 82% efficiency. The article concludes that increasing the switching frequency is a feasible solution for low inductance motor drives.Keywords
This publication has 29 references indexed in Scilit:
- Mechanical and Thermal Design of an Optimized PCB Motor for an Integrated Motor Drive System With GaNFETsIEEE Transactions on Energy Conversion, 2022
- Comparison of PCB winding topologies for axial‐flux permanent magnet synchronous machinesIET Electric Power Applications, 2020
- Performance Analysis of a Coreless Axial-Flux PMSM by an Improved Magnetic Equivalent Circuit ModelIEEE Transactions on Energy Conversion, 2020
- Printed Circuit Board Structural Properties and Spiral Groove Trace Conductors for Hydrodynamic Gap Maintenance in Axial Flux Rotating Machines2019
- Comparative analysis of wave winding topologies and performance characteristics in ultra‐thin printed circuit board axial‐flux permanent magnet machineIET Electric Power Applications, 2019
- High-Speed Coreless Axial-Flux Permanent-Magnet Motor With Printed Circuit Board WindingIEEE Transactions on Industry Applications, 2018
- A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed DrivesIEEE Transactions on Industrial Electronics, 2018
- Integrated Modular Motor Drive Design With GaN Power FETsIEEE Transactions on Industry Applications, 2015
- Low-inductance axial flux BLDC motor drive for more electric aircraftIET Power Electronics, 2012
- An Ultrahigh-Speed, Low Power Electrical Drive SystemIEEE Transactions on Industrial Electronics, 2008