Digital Light‐Processing (DLP) 3D Printing of Magnesium Phosphate Minerals and Cements
Open Access
- 19 January 2023
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (8)
Abstract
Digital light processing (DLP) enables the fabrication of complex 3D structures based on a photopolymerizable resin usually containing a photo initiator and an UV or photo absorber. The resin and thus the final properties of the printed structures can be adjusted by adding fillers like bioceramic powders relevant for bone‐regeneration applications. Herein, a water‐based and biocompatible poly(ethylene glycol diacrylate) (PEGDA) resin containing the photo initiator lithium‐phenyl‐2,4,6‐trimethylbenzoylphosphinate (LAP) enables the production of 3D structures via DLP. The addition of calcium magnesium phosphate cement (CMPC) powder, acting as photo absorber, leads to higher accuracy of the final structures. After curing the printed construct in a diammonium–hydrogen phosphate (DAHP) bath for hardening, the resulting mechanical properties can be adjusted without post‐process sintering. Solid loading of up to 40 wt% CMPC powder is possible, and the resins are investigated regarding their rheological behavior and printability. The resulting constructs are analyzed in respect to their surface morphology using scanning electron microscope (SEM), porosity, phase composition using X‐ray diffraction (XRD) methods, as well as mechanical properties influenced by the hardening process using DAHP for different durations.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (INST 105022/58-1 FUGG)
- Joachim Herz Stiftung
This publication has 34 references indexed in Scilit:
- Characterization and distribution of mechanically competent mineralized tissue in micropores of β-tricalcium phosphate bone substitutesMaterials Today, 2017
- Reaction kinetics of dual setting α-tricalcium phosphate cementsJournal of Materials Science: Materials in Medicine, 2015
- 3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binderBiofabrication, 2015
- Dicalcium phosphate cements: Brushite and monetiteActa Biomaterialia, 2012
- In vivo degradation of low temperature calcium and magnesium phosphate ceramics in a heterotopic modelActa Biomaterialia, 2011
- Formation and properties of magnesium–ammonium–phosphate hexahydrate biocements in the Ca–Mg–PO4 systemJournal of Materials Science: Materials in Medicine, 2011
- A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repairActa Biomaterialia, 2011
- Double‐Network Interpenetrating Bone Cement via in situ Hybridization ProtocolAdvanced Functional Materials, 2010
- Improved surface finish in 3D printing using bimodal powder distributionRapid Prototyping Journal, 2003
- Effect of porosity reduction by compaction on compressive strength and microstructure of calcium phosphate cementJournal of Biomedical Materials Research, 2002