Development of a Sharp-Tipped L-Shaped Stylus for Measurement of Nanoscale Sidewall Features
Open Access
- 5 July 2022
- journal article
- research article
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 16 (4) , 489-496
Abstract
This paper presents a system for measuring nanoscale sidewall features using an L-shaped stylus with a sharp tip. By sharpening the tip of the stylus to the nanometer scale, it is possible to measure nanoscale sidewall features. The stylus shaft is deflected when the sharpened stylus tip contacts the measured surface, and this deflection is measured optically. In this study, we develop the fabrication method of an L-shaped sharpened stylus 20 μm in diameter and 4 mm in length by etching, CO2 laser processing, and bonding. Then, the measurement accuracy and repeatability are examined by measuring V-grooves with nanoscale features. The results clarify that the pitch is approximately 0.3 μm, which is almost the same as the value measured using the photographic image, but the depths measured by the styli fabricated by CO2 laser processing and bonding are approximately 0.15 and 0.07 μm, respectively. The depth measured by the stylus fabricated by bonding is smaller than that measured from the image (approximately 0.16 μm), presumably because of the morphological filter. The maximum repeatability errors for 10 measurements using the styli fabricated by CO2 laser processing and bonding are within ±0.056 and ±0.022 μm in scanning mode, respectively. It is also confirmed that the stylus tip exhibits minimal wear even after 500 measurements.Keywords
Funding Information
- Japan Society for the Promotion of Science (26420392)
- JKA
This publication has 25 references indexed in Scilit:
- Comparison of optical methods for surface roughness characterizationMeasurement Science and Technology, 2015
- A review of the existing performance verification infrastructure for micro-CMMsPrecision Engineering, 2015
- Interpreting the probe-surface interaction of surface measuring instruments, or what is a surface?Surface Topography: Metrology and Properties, 2014
- Comparative study of side-wall roughness effects on leakage currents in through-silicon via interconnects2012
- Sidewall roughness measurement inside photonic crystal holes by atomic force microscopyNanotechnology, 2007
- Smoothing dry-etched microstructure sidewalls using focused ion beam milling for optical applicationsJournal of Micromechanics and Microengineering, 2007
- Atomic force probe for sidewall scanning of nano- and microstructuresApplied Physics Letters, 2006
- Sidewall roughness control in advanced silicon etch processMicrosystem Technologies, 2003
- Direct measurement of nanoscale sidewall roughness of optical waveguides using an atomic force microscopeApplied Physics Letters, 2003
- Dynamic aspects of scanning surface instruments and microscopesNanotechnology, 1990