Design, Realization, and Characterization of Advanced Adhesives for Joining Ultra‐Stable C/C Based Components
- 20 July 2020
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 305 (9)
Abstract
The aim of this work is to develop high‐performance adhesives to join carbon fiber reinforced composites (C/C) for use in aerospace applications; in order to guarantee sound mechanical strength, a low coefficient of thermal expansion, and ease of application on large components. Several different adhesive formulations, based on phenolic or cyanate‐ester resins (charged with the maximum experimentally feasible amount of carbon‐based fillers), are developed and tested. The measurements of the lap shear strength at room temperature of the C/C joined by means of one phenolic and one cyanate ester‐based resin demonstrates that these formulations are the most suitable for the given application. A complete characterization, by means of viscosimetry, dilatometry, and thermal gravimetric analysis, coupled with gas analysis by means of mass spectroscopy, confirms that the phenolic‐based formulation is the most promising joining material. A nano‐indenter is used to obtain its Young modulus and hardness, both inside the joint and as a bulk cured adhesive.Keywords
This publication has 21 references indexed in Scilit:
- POLYMER NANOCOMPOSITES AS ABLATIVE MATERIALS-A COMPREHENSIVE REVIEWInternational Journal of Energetic Materials and Chemical Propulsion, 2013
- Study of joining of carbon/carbon composites for ultra stable structuresJournal of the European Ceramic Society, 2010
- Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon compositesComposites Part B: Engineering, 2010
- High-Temperature Joining of Carbon/Carbon Composites by an Organic Resin AdhesiveJournal of Adhesion Science and Technology, 2009
- Phenol–formaldehyde–pyrolytic oil resins for wood preservation: A rheological studyJournal of Applied Polymer Science, 2007
- Thermal and mechanical evaluation of cyanate ester composites with low-temperature processabilityComposites Part A: Applied Science and Manufacturing, 2007
- Rheological and mechanical properties of percolated cyanate ester nanocompositesPolymer, 2005
- A review of nanoindentation continuous stiffness measurement technique and its applicationsMaterials Characterization, 2002
- Thermal decomposition of cyanate ester resinsPolymer Degradation and Stability, 2002
- Characterization of phenolic resins with thermogravimetry-mass spectrometryThermochimica Acta, 1991