Effect of surface modification of cotton weaves on the mechanical and morphological properties of polyester composites
Authors:
- 11 June 2021
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 113 (8) , 1497-1508
Abstract
The effect of surface modification of cotton weaves on the mechanical and morphological properties of polyester composites were investigated using sodium hydroxide and acetic anhydride at concentrations of 6% and 2%, respectively. Cotton yarns of count 2.5Neβ and strength 36.17 N were woven into different weave structures (plain, twill, satin and rib weaves) using Tappet loom AD-A-Harness. Polyester resin reinforced with unmodified and modified cotton weaves were prepared by hand-layup method. Polyester composites prepared with surface modified cotton weaves resulted in the improvement of the tensile strength, tensile modulus, elongation at break, flexural and impact strength of the composites. On comparison, the mechanical properties of acetic anhydride modified polyester composites were observed to increase more than those of sodium hydroxides modified polyester composites. The increase could be attributed to more effective removal of lignin and other impurities without the degradation of the fibre strength. The morphological study showed that composites with modified polyester composites exhibited better interfacial bonding between the polyester and cotton fabrics. Also, the presence of ester/hydroxyl functional groups was identified in the composites.Keywords
This publication has 37 references indexed in Scilit:
- Viscoelastic and thermal behavior of woven hemp fiber reinforced poly(lactic acid) compositesComposites Part B: Engineering, 2012
- Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibresComposites Part A: Applied Science and Manufacturing, 2011
- Cotton-Epoxy Composites: Development and Mechanical CharacterizationKey Engineering Materials, 2011
- The effects of acetylation on properties of flax fibre and its polypropylene compositesExpress Polymer Letters, 2008
- Flexural behaviour of hybrid laminated compositesComposites Part A: Applied Science and Manufacturing, 2007
- The response of natural fibre composites to ballistic impact by fragment simulating projectilesComposite Structures, 2007
- Influence of alkali treatment on the fine structure and morphology of bamboo fibersJournal of Applied Polymer Science, 2006
- Mechanical properties of woven banana fibre reinforced epoxy compositesMaterials & Design (1980-2015), 2006
- Effect of compatibilization on the performance of biodegradable composites using cotton fiber waste as fillerJournal of Applied Polymer Science, 2003
- Effect of wettability and ageing conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester compositesComposites Science and Technology, 2000