Study of Gettering Mechanisms in Silicon: Competitive Gettering between Phosphorus Diffusion Gettering and Other Gettering Sites
Authors:
- 1 October 2007
- journal article
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 131-133, 399-404
Abstract
The effectiveness of phosphorus diffusion gettering (PDG) and related segregation coefficients for different metal impurities were measured applying thermal treatments in the temperature range 800-950 °C for different times. We used multi-crystalline and mono-crystalline CZ p-type wafers with different boron concentrations and different levels of dislocations and bulk micro-defects (BMD). In all sample types, for Cu and Ni we found complete gettering in the temperature range investigated. In the case of Fe, the segregation coefficient increases with both increase in temperature and extension of time. The increase is qualitatively changing when going above 900 °C. At 950 °C the segregation coefficient increases faster at shorter diffusion time but at extended diffusion time it increases slower as compared to diffusion at 900 °C. At the same temperature and time of phosphorus diffusion the segregation coefficient is found to be independent of the metal impurity concentration in the range of 1012-1015 cm-3 investigated. We have shown that the presence of BMD and dislocations in bulk silicon does not impede the ability of PDG to completely remove Fe, Ni and Cu metal impurities from the bulk. Further analysis suggests that the PDG has the same gettering efficiency for mono-crystalline silicon and multi-crystalline silicon. We conclude that if any bulk precipitation of Fe, Ni and Cu impurities is present in multi-crystalline silicon it cannot seriously compete with PDG. However we found that increasing the boron concentration in the samples reduces the segregation coefficient of Fe, and this reduction is more severe at lower temperatures. Finally, by applying a post anneal ramp down from 900 °C to 700 °C after phosphorus diffusion, we found that the Fe segregation coefficient increases by a factor of 36 for lightly B doped samples, from 53 to 1919, leading to a significant reduction of Fe in the bulk after 2 hours ramp down anneal.Keywords
This publication has 8 references indexed in Scilit:
- Transition-metal profiles in a multicrystalline silicon ingotJournal of Applied Physics, 2005
- Recent advanced applications of AAS and ICP-MS in the semiconductor industryMaterials Science and Engineering: B, 2003
- Estimation of the Upper Limit of the Minority-Carrier Diffusion Length in Multicrystalline Silicon: Limitation of the Action of Gettering and Passivation on DislocationsSolid State Phenomena, 2003
- Iron Solubility in Boron-Doped Silicon and Fe Gettering Mechanism in p/p+ Epitaxial WafersSolid State Phenomena, 2001
- Mechanisms of transition-metal gettering in siliconJournal of Applied Physics, 2000
- Iron contamination in silicon technologyApplied Physics A, 2000
- A Quantitative Method of Metal Impurities Depth Profiling for Gettering Evaluation in Silicon WafersSolid State Phenomena, 1997
- Phosphorus gettering and intrinsic gettering of nickel in siliconApplied Physics Letters, 1984