Grid sensitivity of flow field and noise of high-Reynolds-number jets computed by large-eddy simulation
- 31 May 2018
- journal article
- research article
- Published by SAGE Publications in International Journal of Aeroacoustics
- Vol. 17 (4-5) , 399-424
Abstract
Three isothermal round jets at a Mach number of 0.9 and a diameter-based Reynolds number of 105 are computed by large-eddy simulation using four different meshes in order to investigate the grid sensitivity of the jet flow field and noise. The jets correspond to two initially fully laminar jets and one initially strongly disturbed jet considered in previous numerical studies. At the exit of a pipe nozzle of radius r0, they exhibit laminar boundary-layer mean-velocity profiles of thickness [ ] and [ ], respectively. For the third jet, a peak turbulence intensity close to 9% is also imposed by forcing the boundary layer in the nozzle. The grids contain up to one billion points, and, compared to the grids used in previous simulations, they are finer in the axial direction downstream of the nozzle and in the radial direction on the jet axis and in the outer region of the mixing layers. The main flow field and noise characteristics given by the simulations, including the mixing-layer thickness, the centerline mean velocity, the turbulence intensities on the nozzle lip line and the jet axis, spectra of velocity and far-field pressure obtained from the jet near field by solving the isentropic linearized Euler equations, are presented. With respect to those from previous studies, the results are very similar for the initially laminar jet with thick boundary layers, but they differ significantly for the initially laminar jet with thin boundary layers and for the initially disturbed jet. For the latter two jets, using a finer grid leads to a faster flow development, to higher turbulence intensities in the shear layers and at the end of the potential core, to stronger large-scale structures, and to the generation of more low-frequency noise. Moreover, very small mesh spacings appear to be necessary all along the jet mixing layers, and in particular during their early stages of growth, to properly capture the formation and dynamics of the flow coherent structures and thus obtain results in good agreement with measurements available for high-Reynolds-number jets.Keywords
This publication has 59 references indexed in Scilit:
- Simulations of Initially Highly Disturbed Jets with Experiment-Like Exit Boundary LayersAIAA Journal, 2016
- Subsonic Jet Noise Simulations Using Both Structured and Unstructured GridsAIAA Journal, 2015
- LES-based evaluation of a microjet noise reduction concept in static and flight conditionsJournal of Sound and Vibration, 2011
- Current Status of Jet Noise Predictions Using Large-Eddy SimulationAIAA Journal, 2008
- COMPUTATIONAL PREDICTION OF FLOW-GENERATED SOUNDAnnual Review of Fluid Mechanics, 2006
- Investigation of noise sources in high-speed jets via correlation measurementsJournal of Fluid Mechanics, 2005
- Computational aeroacoustics: progress on nonlinear problems of sound generationProgress in Aerospace Sciences, 2004
- Contributions of Computational Aeroacoustics to Jet Noise Research and PredictionInternational Journal of Computational Fluid Dynamics, 2004
- Noise Investigation of a High Subsonic, Moderate Reynolds Number Jet Using a Compressible Large Eddy SimulationTheoretical and Computational Fluid Dynamics, 2003
- Computational aeroacoustics - Issues and methodsAIAA Journal, 1995