Analytical Calculation of the Coupling Factor for Single and Multi-layered Circular, Square, and Hexagonal Wireless Power Transfer Coils
Author:
- 15 November 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 453-459
Abstract
This paper proposes a method to compute the coupling factor of single and multi-layered coils having a square, hexagonal, or circular geometry, placed center to center to each other, such that there is no lateral or angular misalignment, and only vertical misalignments are of interest. Existing methods involve using 2D / 3D electromagnetic solvers, elliptical integrals, Bessel function, magnetic vector potential, or a combination of these methods. All these methods increase computational complexity and are not in a compact form. The calculation of the coupling factor requires the computation of mutual inductance and the self-inductance of the coils. The self-inductance of single-layered coils is calculated using Modified Wheeler's eq. and the self-inductance for multi-layered coils is calculated using a combination of Modified Wheeler's eq. (for the inductance of each layer) and elliptical integrals (for mutual inductance between layers). The mutual inductance of single and multi-layered coils is derived based on the series expansion of Neumann's eq. with an addition of a factor to reduce the maximum error from 37% to 6.64%. A side length transformation eq. is derived and proposed for equivalent coil transformation from a hexagonal coil to a circular coil or vice versa. The method proposed here requires only geometric quantities of the coils for the computation of mutual inductance. Simulation and experimental results showed excellent agreement with the proposed model of separation distances greater than the inner radius of the transmitter (Tx) or receiver (Rx) coil (whichever has a smaller inner radius). For simulation results, an error of up to 5% was seen for single-layered coils and an error of up to 6.64% was seen for multi-layered coils. For experimental results, the error was under 5% for double-layered air coils and 8.1% for single-layered coils with a ferrite core at separation distances greater than the inner radius of the coils. Hence, the coupling factor can be computed accurately with the proposed model at separation distances greater than the inner radius of Tx or Rx coil.Keywords
This publication has 16 references indexed in Scilit:
- A simple formula of mutual inductance and its application in wireless power transfer system2015
- Tracking Optimal Efficiency of Magnetic Resonance Wireless Power Transfer System for Biomedical Capsule EndoscopyIEEE Transactions on Microwave Theory and Techniques, 2014
- Development of the optimization framework for wireless power transfer systems2014
- A mutual inductance approach for optimization of wireless energy transmission2014
- Calculation of mutual inductance from magnetic vector potential for wireless power transfer applications2012
- Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical ImplantsIEEE Transactions on Biomedical Circuits and Systems, 2010
- Analysis, Experimental Results, and Range Adaptation of Magnetically Coupled Resonators for Wireless Power TransferIEEE Transactions on Industrial Electronics, 2010
- New Mutual Inductance Calculation of the Magnetically Coupled Coils: Thin Disk Coil-Thin Wall SolenoidJournal of Electromagnetic Waves and Applications, 2006
- New procedures for calculating the mutual inductance of the system: filamentary circular coil-massive circular solenoidIEEE Transactions on Magnetics, 2003
- Simple accurate expressions for planar spiral inductancesIEEE Journal of Solid-State Circuits, 1999