Study on the Combined Mining Scheme for Coal Resources under High-Voltage Pylons and the Reinforcement for Pylons
Open Access
Abstract
The increasing use of high-voltage transmission wires requires more and more high-voltage pylons, and sometimes, constructing pylons in mining areas is very urgent. To ensure the safe operation of pylons, coal pillars with large side lengths are usually used to provide sufficient support; however, this results in a huge waste of coal. Eight high-voltage pylons are arranged on the ground surface corresponding to the location of working face 1110 of Sima Coal Mine in Shanxi Province, China, which cannot be mined by traditional methods. Taking this as the engineering background, the failure mode of high-voltage pylon is first analyzed. Using FLAC3D numerical simulations, the influence of five different mining plans on ground surface deformation in working face 1110 is evaluated, and the vertical settlement and horizontal deformation in different areas of the ground surface, as well as the variation law of horizontal strain and slope are analyzed. According to the numerical simulation results, the range of thickness-limiting mining or backfill mining in working face 1110 is shown in scheme 3, and the key regions in the mining process are determined. Secondly, the strengthening scheme of high-voltage pylons is designed, that is, the four foundations of high-voltage pylons are connected as a whole with steel supports and steel connectors so as to improve the structural strength of the high-voltage pylon. Finally, the position change in the foundation of high-voltage pylons was monitored for 22 consecutive months. The results show that the maximum settlement of the high-voltage tower foundation is 3.1 m, which is consistent with the actual mining thickness; The high-voltage pylon was stably moved, and the change in transmission line tension and total length was usually less than 1.0%. The combined mining scheme and foundation strengthening scheme can ensure the safe operation of high-voltage pylons and provide a new method for the stability control of ground buildings in coal mining subsidence area.Keywords
Funding Information
- National Natural Science Foundation of China (51778215, 52174072, 51908515, ZR2021QE170, 52020-2018-04-08)
- Department of Guizhou Province Fund (51778215, 52174072, 51908515, ZR2021QE170, 52020-2018-04-08)
- Science and Technology Department of Guizhou Province Fund (51778215, 52174072, 51908515, ZR2021QE170, 52020-2018-04-08)
- Natural Science Foundation of Shandong Province (51778215, 52174072, 51908515, ZR2021QE170, 52020-2018-04-08)
- Liupanshui Science and Technology Bureau Fund (51778215, 52174072, 51908515, ZR2021QE170, 52020-2018-04-08)
This publication has 31 references indexed in Scilit:
- Numerical Investigation of the Dynamic Mechanical State of a Coal Pillar During Longwall Mining Panel ExtractionRock Mechanics and Rock Engineering, 2012
- Ground subsidence geo-hazards induced by rapid urbanization: implications from InSAR observation and geological analysisNatural Hazards and Earth System Sciences, 2012
- Mining subsidence control by solid backfilling under buildingsTransactions of Nonferrous Metals Society of China, 2011
- Research on Surface Failure Mechanism and Building Stability for Coal MiningAdvanced Materials Research, 2011
- Analysis of biodegradation in a 3-D heterogeneous porous medium using nonlinear stochastic finite element methodAdvances in Water Resources, 2006
- Finite element modeling of transmission line under downburst wind loadingFinite Elements in Analysis and Design, 2005
- Coal pillar loading in shallow mining conditionsInternational Journal of Rock Mechanics and Mining Sciences, 1996
- Two- and three-dimensional elasto-plastic analysis for coal pillar design and its application to highwall miningInternational Journal of Rock Mechanics and Mining Sciences, 1995
- A basic posture control mechanism: the stabilization of the centre of gravityElectroencephalography and Clinical Neurophysiology, 1990
- A review of ground movements due to civil and mining engineering operationsGeological Society, London, Engineering Geology Special Publications, 1988