On the Role of Grain Size and Carbon Content on the Sensitization and Desensitization Behavior of 301 Austenitic Stainless Steel
Open Access
Abstract
The effect of grain size in the range 72 to 190 μm and carbon content in the range 0.105–0.073 wt.% on the intergranular corrosion of the austenitic stainless steel 301 has been investigated. Grain boundary chromium depletion has been studied directly using energy dispersive X-ray spectroscopy combined with scanning transmission electron microscopy and indirectly using double loop electrochemical potentiokinetic reactivation tests. In addition, chromium depletion has been modelled using the CALPHAD Thermo-Calc software TC-DICTRA. It is shown that the degree of sensitization measured using the double loop electrochemical potentiokinetic reactivation tests can be successfully predicted with the aid of a depletion parameter based on the modelled chromium depletion profiles for heat treatment times covering both the sensitization and de-sensitization or self-healing. Additionally, along with intergranular M23C6 carbides, intragranular M23C6 and Cr2N nitrides that affect the available Cr for grain boundary carbide precipitation were also observed.Keywords
Funding Information
- H2020 Marie Skłodowska-Curie Actions (675715)
This publication has 29 references indexed in Scilit:
- Evaluation of the effect of grain size on chromium carbide precipitation and intergranular corrosion of 316L stainless steelCorrosion Science, 2013
- Effect of Grain Size on Corrosion: A ReviewCorrosion, 2010
- Assessment of intergranular corrosion (IGC) in 316(N) stainless steel using electrochemical noise (EN) techniqueCorrosion Science, 2009
- Effect of solution treatment conditions on the sensitization of austenitic stainless steelJournal of the Serbian Chemical Society, 2009
- Intergranular corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicellCorrosion Science, 2008
- Use of eddy current testing method in detection and evaluation of sensitisation and intergranular corrosion in austenitic stainless steelsCorrosion Science, 2006
- Effects of ageing conditions on the precipitates evolution, chromium depletion and intergranular corrosion susceptibility of AISI 316L: experimental and modeling resultsMaterials Science and Engineering: A, 2004
- The electrochemical reactivation test (ERT) to detect the susceptibility to intergranular corrosionCorrosion Science, 2003
- Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steelActa Materialia, 1998
- Chromium depletion in the vicinity of carbides in sensitized austenitic stainless steelsMetallurgical Transactions A, 1984