Effect of Increased Ionic Liquid Uptake via Thermal Annealing on Mechanical Properties of Polyimide-Poly(ethylene glycol) Segmented Block Copolymer Membranes
Open Access
Abstract
Proton exchange membranes (PEMs) suffer performance degradation under certain conditions—temperatures greater than 80 °C, relative humidity less than 50%, and water retention less than 22%. Novel materials are needed that have improved water retention, stability at higher temperatures, flexibility, conductivity, and the ability to function at low humidity. This work focuses on polyimide-poly(ethylene glycol) (PI-PEG) segmented block copolymer (SBC) membranes with high conductivity and mechanical strength. Membranes were prepared with one of two ionic liquids (ILs), either ethylammonium nitrate (EAN) or propylammonium nitrate (PAN), incorporated within the membrane structure to enhance the proton exchange capability. Ionic liquid uptake capacities were compared for two different temperatures, 25 and 60 °C. Then, conductivities were measured for a series of combinations of undoped or doped unannealed and undoped or doped annealed membranes. Stress and strain tests were performed for unannealed and thermally annealed undoped membranes. Later, these experiments were repeated for doped unannealed and thermally annealed. Mechanical and conductivity data were interpreted in the context of prior small angle X-ray scattering (SAXS) studies on similar materials. We have shown that varying the compositions of polyimide-poly(ethylene glycol) (PI-PEG) SBCs allowed the morphology in the system to be tuned. Since polyimides (PI) are made from the condensation of dianhydrides and diamines, this was accomplished using components having different functional groups. Dianhydrides having either fluorinated or oxygenated functional groups and diamines having either fluorinated or oxygenated diamines were used as well as mixtures of these species. Changing the morphology by creating macrophase separation elevated the IL uptake capacities, and in turn, increased their conductivities by a factor of three or more compared to Nafion 115. The stiffness of the membranes synthesized in this work was comparable to Nafion 115 and, thus, sufficient for practical applications.Keywords
This publication has 106 references indexed in Scilit:
- Influence of the poly(ethylene oxide)/polybutadiene IPN morphology on the ionic conductivity of ionic liquidEuropean Polymer Journal, 2013
- Thermally treated copoly(ether-imide)s made from bpda and alifatic plus aromatic diamines. GAS separation properties with different aromatic diamimesJournal of Membrane Science, 2011
- Development of a new highly conductive and thermomechanically stable complex membrane based on sulfonated polyimide/ionic liquid for high temperature anhydrous fuel cellsJournal of Power Sources, 2011
- Open for businessNature Communications, 2010
- HPW/MCM‐41 Phosphotungstic Acid/Mesoporous Silica Composites as Novel Proton‐Exchange Membranes for Elevated‐Temperature Fuel CellsAdvanced Materials, 2010
- Progress Toward Accurate Through-Plane Ion Transport Resistance Measurement of Thin Solid ElectrolytesJournal of the Electrochemical Society, 2010
- Transport properties of polyimides derived from benzophenonetetracarboxylic dianhydride and other diaminesPolymer Science, Series A, 2009
- Segmented Polyimides with Poly(ethylene oxide) Blocks Exhibiting Liquid CrystallinityMacromolecules, 2008
- Polyimides with main-chain ethylene oxide units: synthesis and propertiesPolymer, 2002
- Layer Structures. 2. Influence of Spacers on Chain Packing and Phase Transitions of Poly(ester-imide)s Derived from N-(4-Carboxyphenyl)trimellitimideMacromolecules, 1994