Development of soft eutectic phase change material modified with expanded graphite for thermal energy storage and human comfort applications
- 28 January 2025
- journal article
- research article
- Published by SAGE Publications in Energy & Environment
- Vol. 37 (5) , 3119-3144
Abstract
Organic phase change materials (PCMs) have gained huge importance for thermal energy storage systems, but their applicability is restricted due to their low thermal conductivity and hardness. The aim of this research work is to solve the problem by developing a novel organic binary eutectic PCM employing paraffin wax and coconut oil in the eutectic mixture (ratio 1:1) to soften the PCM for thermal comfort applications. 3D expanded graphite (EG) was used as a filler to enhance the thermophysical properties of eutectic-EG PCM composite formed by melt-mixing technique. The percolation limit of EG was 0.5 wt-% to form the thermal network in PCM matrix. The thermal conductivity of eutectic-EG PCM composite enhanced significantly from 0.2 W m−1 K−1 to 0.55 W m−1 K−1 at 2 wt-% of EG in pristine PCM. Differential scanning calorimetry (DSC) was carried out to analyse the energy storage enthalpies and temperatures of composites. The 50 consecutive thermal heating and cooling cycles performed by conventional heating system showed the good thermal reliability of the composite. The numerical 2D simulation was conducted to reveal the heat propagation behaviour in the developed composite with the post-EG addition and to validate the enhanced thermal conductivity results obtained experimentally. The cost analysis results reveals that the cost per mean power of the composite is composite is approximately 100% lower than the pristine PCM. The developed composite's outstanding energy storage property indicates its potential for developing the soft heating pads/cartridges for human comfort and also the solar thermal energy storage applications for medium temperature ranges.Keywords
Funding Information
- Defence Research and Development Organisation (DLJ/TC/1025/I/61)
This publication has 52 references indexed in Scilit:
- Evolving Thermal Energy Storage Using Hybrid Nanoparticle: An Experimental Investigation on Salt Hydrate Phase Change Materials for Greener FutureEnergy Technology, 2024
- Synthesis and Characterization of Dicarboxylic Acid Esters of 1‐Hexadecanol for a Thermal Energy Storage Application Range of 50–55 °CEnergy Technology, 2023
- Performance enhancement of latent heat storage unit by the multiple chambersEnergy Storage, 2023
- Hydrophilic expanded graphite-magnesium nitrate hexahydrate composite phase change materials: Understanding the effect of hydrophilic modification on thermophysical propertiesInternational Journal of Energy Research, 2019
- A review of the applications of phase change materials in cooling, heating and power generation in different temperature rangesApplied Energy, 2018
- Phase-change materials (PCM) for automotive applications: A reviewApplied Thermal Engineering, 2018
- Preparation and analysis of lightweight wall material with expanded graphite (EG)/paraffin composites for solar energy storageApplied Thermal Engineering, 2017
- Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based compositesApplied Energy, 2015
- Preparation and study of thermal properties of phase change materials based on paraffin–alumina‐filled polyethyleneJournal of Applied Polymer Science, 2010
- Phase change materials for smart textiles – An overviewApplied Thermal Engineering, 2008