Dimensional synthesis of a lightweight shoulder exoskeleton
Authors:
- 1 July 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21596247,p. 670-675
Abstract
Powered exoskeletons can provide motion enhancement for both healthy and physically challenged people. Compared with lower limb exoskeletons, upper limb exoskeletons are required to have multiple degrees-of-freedom and can still produce sufficient augmentation force. Designs using serial mechanisms usually result in complicated and bulky exoskeletons that prevent themselves from being wearable. This paper presents a new exoskeleton aimed to achieve compactness and wearability. We consider a shoulder exoskeleton that consists of two spherical mechanisms with two slider crank mechanisms. The actuators can be made stationary and attached side-by-side, close to a human body. Thus better inertia properties can be obtained while maintaining lightweight. The dimensions of the exoskeleton are synthesized to achieve maximum output force. Through illustrations of a prototype, the exoskeleton is shown to be wearable and can provide adequate motion enhancement of a human's upper limb.Keywords
This publication has 4 references indexed in Scilit:
- Design and experiment of a compact wrist mechanism with high torque densityMechanism and Machine Theory, 2014
- Lower Extremity Exoskeletons and Active Orthoses: Challenges and State-of-the-ArtIEEE Transactions on Robotics, 2008
- Upper-Limb Powered Exoskeleton DesignIEEE/ASME Transactions on Mechatronics, 2007
- Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX)IEEE/ASME Transactions on Mechatronics, 2006