Fracture Processes in Fiber Composite Materials
Author:
- 1 January 1969
- book chapter
- Published by ASTM International
- p. 473-502
Abstract
The process of fracture in homogeneous and anisotropic composite materials involves three steps : (1) the initiation of a microcrack, (2) the stable growth of this microcrack under increasing load, out to macrocrack size, and (3) the unstable propagation of this crack at a critical stress level. The conditions for each of these processes are reviewed for homogeneous materials and then discussed in detail for fiber composite materials. The conditions for fracture initiation by fiber cracking depend primarily on the length and diameter of the fiber, their perfection, the fiber modulus, the test temperature, and the degree of interaction of the fiber with the surrounding matrix. Matrix and interface strength depend primarily on temperature, strain rate, and interfacial void content (for resin matrices). Unless the matrix is extremely strain-rate sensitive, premature fiber fracture does not lead to instability, and the composite strength is determined primarily by the average fiber strength. Several mechanisms for increasing the matrix toughness are discussed. The toughness associated with unstable, longitudinal crack propagation in composites then is considered in terms of fiber content, matrix toughness, interfacial bond strength, and matrix shear strength. It is shown that in certain composites the toughness decreases with increasing fiber content, and consequently maximum load carrying capacity is achieved at a particular fiber content Vf*, that increases with decreasing crack length. In other systems, particularly those containing cold-drawn metal fibers, both toughness and ultimate strength increase with fiber content.Keywords
This publication has 17 references indexed in Scilit:
- A statistical investigation of microcrack formationActa Metallurgica, 1969
- Recrystallization of Nickel-coated Carbon FibresNature, 1968
- Tensile properties of fibre-reinforced metals: Fracture mechanicsJournal of the Mechanics and Physics of Solids, 1967
- Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenumJournal of the Mechanics and Physics of Solids, 1965
- Mechanics of fracture in large structuresProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1965
- A photoelastic study of the shear stresses associated with the transfer of stress during fibre reinforcementBritish Journal of Applied Physics, 1965
- A mechanism for the control of crack propagation in all-brittle systemsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1964
- Strong solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1964
- The effect of plastic strain and temperature on microcrack propagation in iron-3% siliconActa Metallurgica, 1964
- The elasticity and strength of paper and other fibrous materialsBritish Journal of Applied Physics, 1952