High saturation magnetization films of FeCoCr
Authors:
- 15 May 2002
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 91 (10) , 6818-6820
Abstract
Thin (∼1000 Å) films of have been prepared by magnetron sputtering on substrates. The films were shown to be body-centered-cubic and (110) textured. It was found that the films possess a saturation magnetization of 24.5 kG at room temperature. Doping the films with Cr in the range of 0–13 at. % increased corrosion resistance, electrical resistivity, and reduced the saturation magnetization as a function of the amount of added Cr. The coercivity of both doped and undoped as-deposited films (80–120 Oe) decreased substantially after a 220 °C magnetic anneal. Electrochemical corrosion testing was done in two chloride salt solutions. Potentiodynamic scans performed on films in a 0.47 M chloride bath solution at showed a substantial increase in corrosion resistance of the films between 6.6 and 8.2 a/o Cr. Similar scans performed in a 0.01 M chloride solution at showed good corrosion resistance for all the films.
Keywords
This publication has 9 references indexed in Scilit:
- High moment soft magnetic FeTiN thin films for recording head materialsJournal of Applied Physics, 1999
- Microstructure and magnetic properties of FeCoN thin filmsJournal of Applied Physics, 1998
- Microstructure and magnetic properties of FeTaN filmsIEEE Transactions on Magnetics, 1994
- Ferromagnetism1993
- Nitrogen-doped iron-film-based laminated materials for thin-film recording headsJournal of Applied Physics, 1991
- rf-diode-sputtered iron nitride films for thin-film recording head materialsJournal of Applied Physics, 1990
- Magnetic properties of Fe-Co-Ni films with high saturation magnetization prepared by evaporation and electrodepositionIEEE Translation Journal on Magnetics in Japan, 1990
- The magnetic and corrosion properties of iron cobalt chromium filmsJournal of Applied Physics, 1984
- Predicting Behavior of Corrosion Resistant Alloys By Potentiostatic Polarization MethodsCorrosion, 1962