Influence of CeO₂ nanoparticle addition on engine performance, combustion, and emissions of ethiopian podocarpus falcatus biodiesel
Open Access
- 6 March 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
The identification of region-specific, non-edible biodiesel feedstocks is critical for expanding sustainable fuel use without competing with food resources. This study reports the first comprehensive evaluation of engine performance, combustion behavior, and emissions of Ethiopian Podocarpus falcatus biodiesel enhanced with low-dose cerium oxide (CeO₂) nanoparticles in a compression ignition engine. Biodiesel–diesel blends containing 10–30% biodiesel was tested with and without 80 ppm CeO₂. Increasing biodiesel content alone reduced brake thermal efficiency from 54.7% for diesel to 49.2% for B30 and decreased brake power from 4.44 to 3.86 kW at full load. The addition of CeO₂ effectively mitigated these penalties, increasing brake thermal efficiency by up to 11.7% and restoring brake power by 3–10% across all blends, while brake specific fuel consumption decreased by 54–56% relative to untreated fuels under identical conditions. Combustion analysis showed higher peak cylinder pressure up to 71.2 bar, enhanced premixed heat-release rate reaching 130.2 J per °CA, advanced combustion phasing by 2–3 °CA, shortened ignition delay by about 2 °CA, and reduced combustion duration by 3–4 °CA. Emission measurements indicated substantial reductions in carbon monoxide by 7.5–16.7%, unburned hydrocarbons by up to 70.2%, and smoke opacity by 9–10%, accompanied by a moderate increase in NOx emissions of approximately 7% at full load due to higher combustion temperatures. Overall, the results demonstrate that low-dose CeO₂ nanoparticles can effectively offset biodiesel-induced performance losses while enhancing combustion and emission characteristics, highlighting Podocarpus falcatus as a promising and sustainable biodiesel feedstock for high-efficiency compression ignition engine operation without hardware modification.Keywords
This publication has 43 references indexed in Scilit:
- Performance, emission, combustion and economics analysis of CI engine fueled with mixed oil biodiesel blends from waste cooking oil and pongamia oilDiscover Applied Sciences, 2025
- Comparative evaluation of nanoparticle-enriched Gossypium hirsutum methyl ester blends for enhanced energy, emission, and economic performance in diesel enginesCleaner Engineering and Technology, 2025
- Size impact of cerium oxide nanoparticles (CeO2) on ternary fuel blend using third-generation biodiesel in VCR diesel engineJournal of Thermal Analysis and Calorimetry, 2024
- The role of nanoparticles on biofuel production and as an additive in ternary blend fuelled diesel engine: A reviewEnergy Reports, 2021
- Experimental studies on the performance and emission parameters of a direct injection diesel engine fueled with nanoparticle-dispersed biodiesel blendNanotechnology for Environmental Engineering, 2021
- A review on regulations, current status, effects and reduction strategies of emissions for marine diesel enginesFuel, 2020
- Impact of various metal-oxide based nanoparticles and biodiesel blends on the combustion, performance, emission, vibration and noise characteristics of a CI engineFuel, 2020
- Investigating the engine performance, emissions and soot characteristics of CI engine fueled with diesel fuel loaded with graphene oxide-titanium dioxide nanocompositesFuel, 2020
- A comparative study on the effect of nano-additives on the performance and emissions of a diesel engine run on Jatropha biodieselFuel, 2020
- The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO2 nanoparticles addition in diesel/biodiesel/n-butanol blendsFuel, 2018