Enhanced Performance and High Resistance to Efficiency Degradation of Blue Quantum-Dot Light-Emitting Diodes Using the Lewis Base Blended Hole-Transporting Layers
- 22 December 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (1) , 1251-1258
Abstract
The distinctive characteristics of blue quantum dots (QDs) such as their deep valence band and large bandgap give rise to an elevated hole injection barrier between the hole transport layers (HTLs) and the QD active layer. This results in an imbalance of carrier transport and injection across the device, leading to a degrading performance in QD light-emitting diodes (QLEDs). In this paper, high-efficiency and low-efficiency degradation blue CdSe/CdS/ZnS QLEDs were fabricated by using the Lewis base, 1,2-bis(diphenylphosphino)ethane (DPPE), blended with poly(9-vinylcarbazole) (PVK) (DPPE:PVK) as HTLs. The device performance of blue QLEDs can be finely adjusted by manipulating the blending ratio between DPPE and PVK. When 4 wt % DPPE was blended with PVK (4 wt % DPPE:PVK) as the HTL, the device achieved its optimal performance. Compared to the device with neat PVK as the HTL, the turn-on voltage of blue QLEDs with the 4 wt % DPPE:PVK HTL is reduced from 3.21 to 2.9 V. The maximum current efficiency (CE) and external quantum efficiency (EQE) of blue QLEDs increase from 2.92 cd A-1 and 5.89% in neat PVK to 5.75 cd A-1 and 11.75% for the 4 wt % DPPE:PVK HTL. Furthermore, the QLEDs incorporating DPPE:PVK HTLs exhibited exceptional resistance to efficiency degradation (EQE = 8.83%@L = 12,000 cd m-2 for 4 wt % DPPE:PVK as the HTL and EQE = 2.80%@L = 12,000 cd m-2 for neat PVK as the HTL). A more in-depth analysis reveals that enhanced device performance results from the chelating and bridging effect of the bidentate ligand Lewis base DPPE. These effects strengthen the binding of free metal ions in the blue QDs, reduce the charge barriers, enhance the contact between the HTLs and the QD active layer, and ultimately improve hole injection.Keywords
Funding Information
- Special Project for Research and Development in Key areas of Guangdong Province (2019B090911004, 2020B0101030008)
- National Natural Science Foundation of China (61377065, 61574064)
This publication has 50 references indexed in Scilit:
- Solution-processed, high-performance light-emitting diodes based on quantum dotsNature, 2014
- Highly Efficient Blue–Green Quantum Dot Light-Emitting Diodes Using Stable Low-Cadmium Quaternary-Alloy ZnCdSSe/ZnS Core/Shell NanocrystalsACS Applied Materials & Interfaces, 2013
- Controlled Alloying of the Core–Shell Interface in CdSe/CdS Quantum Dots for Suppression of Auger RecombinationACS Nano, 2013
- Organic light-emitting diodes employing efficient reverse intersystem crossing for triplet-to-singlet state conversionNature Photonics, 2012
- Electroluminescence of green CdSe/ZnS quantum dots enhanced by harvesting excitons from phosphorescent moleculesApplied Physics Letters, 2010
- Square helix versus zigzag chain of group 12 metal coordination polymers with 1,2-bis(diphenylphosphino)ethane (dppe)Inorganic Chemistry Communications, 2010
- Frequency analysis on poly(3-hexylthiopene) rectifier using impedance spectroscopyThin Solid Films, 2009
- Nanosized Silver(I) Coordination Networks of Mixed Bix-Diphosphine (Bix = 1,4-Bis(imidazol-1-ylmethyl)benzene)Crystal Growth & Design, 2004
- Diphosphines as bridging ligands in polymeric and dimeric thione-S-ligated Ag(I) nitrate complexesInorganica Chimica Acta, 2004
- Electric field redistribution on light-emitting devices based on Langmuir–Blodgett films of a porphyrin derivativeSolid State Communications, 2001