Installation of High Resistance Grounding System on the Ungrounded System at Offshore Platform
- 23 November 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Single line to earth fault usually can be seen in the ungrounded system. The ungrounded system is used widely in offshore platforms due to its advantages over the overvoltage whenever a fault occurs in the power systems. Continuous production with less interruption is vital in the oil and gas industry to achieve the production rate target. The grounding system has evolved for the past years and improvements have been made to the ungrounded system that has been around the years in the industry. The ungrounded system has been the best grounding system when the power system needs to maintain its operation with the presence of tolerable fault such as the single line to earth fault. Some facilities have included the feature of tripping the main circuit breaker whenever there is ground fault on the non-critical equipment. This has been unproductive to the operation and time consuming in restarting the plant facility after power failure or shutdown. Kikeh offshore platform is having the same situation whenever the ground fault occurs the main circuit breaker tripped and affects the operation badly. The High Resistance Grounding (HRG) design has proved to be able to sustain the fault and at the same time allows the plant to continue operating without any unnecessary shutdown. This improves the downtime and increases productivity. Furthermore, arc hazards to personnel and the classification flammable gas area can be minimized.Keywords
This publication has 6 references indexed in Scilit:
- COMPARISON OF EARTHING TECHNIQUES FOR SINGLE LINE TO GROUND FAULT IN 11 kV DISTRIBUTION SYSTEM USING SIMULINKJournal of Engineering and Sustainable Development, 2019
- The Effects of System Grounding, Bus Insulation, and Probability On Arc Flash Hazard Reduction—Part 2: TestingIEEE Transactions on Industry Applications, 2014
- High Resistance Neutral Grounding [History]IEEE Industry Applications Magazine, 2011
- A Novel Method of Measuring Inherent Power System Charging CurrentIEEE Transactions on Industry Applications, 2011
- Characteristics of different power systems neutral grounding techniques: fact and fiction2002
- System grounding and ground fault protection in the petrochemical industry: a need for a better understanding2002